Quick Bond Activator

Description

Quick Bond and Quick Bond Activator are unique products especially designed for the quick repair and gluing of metals and almost every type of modern synthetic.
Quick Bond Activator is an additive to accelerate the curing of Quick Bond.

The extremely long open time of Quick Bond ensures that parts can be perfectly lined up when gluing. When the time comes to form a bond, Quick Bond Activator is applied to start an immediate reaction.

Quick Bond adheres perfectly to plastics and lacquered or bare metal parts. The product cures in seconds once the Activator is sprayed on, and can be manipulated or stressed immediately.

Quick Bond Activator comes in a handy 150 ml aerosol can.

See also: Repaplast Scratch Repair System

Properties

• Colourless.
• Accelerates the curing of Quick Bond.

Instructions for use

• Surface preparation: The surface must be clean, dry and free of grease. Roughen up or sand the surface. Clean metal surfaces with Innotec Multisol or Innotec Seal and Bond Remover. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic and pre-treat them with Innotec Repaplast Primer.
• Application method: When gluing: Give one part a thin layer of Quick Bond, spray the other part with a thin layer of Quick Bond Activator, and join the parts together. Allow a few minutes for Quick Bond to dry.
  When repairing: After 30 seconds, apply a thin layer of Quick Bond Activator over the element repaired with Quick Bond. It will take only a few seconds to harden.

Technical information

• Base: Aliphatic hydrocarbon
• Density: 599 kg/m³
• Consistency: Thin liquid
• Viscosity: ± 25 mPa.s
• Solvents: Mixture of aliphatics
• Flash point: < 0°C
• Application conditions: +5°C to +35°C
• Type of surface: Just about all modern plastics and metals
• Surface preparation: The surface must be clean, dry and free of grease. Roughen up or sand the surface. Clean metal surfaces with Innotec Multisol or Innotec Seal and Bond Remover. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic and pre-treat them with Innotec Repaplast Primer.
• Application method: When gluing: Give one part a thin layer of Quick Bond, spray the other part with a thin layer of Quick Bond Activator, and join the parts together. Allow a few minutes for Quick Bond to dry.
  When repairing: After 30 seconds, apply a thin layer of Quick Bond Activator over the element repaired with Quick Bond. It will take only a few seconds to harden.
• Cleaning of materials used: With Innotec Multisol
• Shelf life: 3 years in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• EAN Code: 5400563000137