Alu Powder

Description

Alu Powder is part of the Innotec Scratch Repair System and is a specially developed aluminium pigment that should be added to the Alu Scratch Repair. By adding this product the repair resin will obtain the required hardness, so that it will be perfectly sandable once it is dry.

Alu Powder is not only meant to reinforce, but also to colour the repair resin giving it the basic colour for repairing.

See also: Alu Scratch Repair System

Properties

• Aluminium pigment to be added to the Alu Scratch Repair.
• Reinforcing the repair resin that will be perfectly sandable as a result.
• Colouring the repair resin.

Instructions for use

• Surface preparation: The surface must be clean, dry and free of grease. Clean the repair area using Innotec Repaplast Cleaner Antistatic (allow to evaporate for 5 minutes).
• Application method: In a mixing cup, add a little Alu Powder to the Alu Scratch Repair and mix until a homogeneous mixture is obtained (mixture approx 1:10).

Technical information

• Base: Stabilized aluminium pigment
• Consistency: Paste
• Solvents: Naphta
• Flash point: > 41°C
• Temperature resistance: -60°C to +80°C
• UV resistance: Good
• Water resistance: Good
• Solvent resistance: Moderate
• Application conditions: +5°C to +35°C
• Type of surface: Almost all aluminium and metal surfaces
• Surface preparation: The surface must be clean, dry and free of grease. Clean the repair area using Innotec Repaplast Cleaner Antistatic (allow to evaporate for 5 minutes).
• Application method: In a mixing cup, add a little Alu Powder to the Alu Scratch Repair and mix until a homogeneous mixture is obtained (mixture approx 1:10).
• Cleaning of materials used: With Innotec Multisol
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 1 year in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• EAN Code: 5400563030837