Aero-Bond

Art.: 07.0629.6100 Transparent
Bottle 15 ml

Aero-Primer is part of the Aero-Bond Set, this is a high-quality anaerobic glue system, which has been specially developed for gluing metal to glass.

More info
This product is currently not available for order.
Please contact your local distributor.
This article is part of a set and cannot be ordered separately.

Safety data sheet

To order, please contact your distributor

Description

Aero-Primer is part of the Aero-Bond Set, this is a high-quality anaerobic glue system, which has been specially developed for gluing metal to glass.

none

Properties

See also: Aero-Bond Set

Instructions for use

  • Surface preparation: The surface must be clean, dry and free of grease. Clean the surface with Innotec Multisol or Innotec Seal and Bond Remover.
  • Application method: Remove residues of old glue. Locate area and apply Aero-Primer to the window using the brush in the cap. Leave a few seconds to evaporate. If necessary, smooth off the edges of the mirror base. Then, depending on the size of the overlap, apply the correct amount of Aero-Bond to the middle of the mirror base. Position the mirror base and press lightly for 20 seconds. To maintain a sufficiently thick layer of glue and avoid glass to metal contact, do not press too hard when gluing. Leave to dry for 5 minutes. Mount the fixing and finish assembly. If necessary, clean with Foam Glass Clean Plus.

Technical information

  • Base: Acetone
  • Density: 815 kg/m³
  • Consistency: Liquid
  • Viscosity: 2 mPa.s
  • Flash point: < 0°C
  • Temperature resistance: -40°C to +149°C (like Aero-Bond)
  • UV resistance: Good
  • Application conditions: +15°C to +40°C
  • Type of surface: Glass, ceramic layers, metal and aluminium
  • Surface preparation: The surface must be clean, dry and free of grease. Clean the surface with Innotec Multisol or Innotec Seal and Bond Remover.
  • Application method: Remove residues of old glue. Locate area and apply Aero-Primer to the window using the brush in the cap. Leave a few seconds to evaporate. If necessary, smooth off the edges of the mirror base. Then, depending on the size of the overlap, apply the correct amount of Aero-Bond to the middle of the mirror base. Position the mirror base and press lightly for 20 seconds. To maintain a sufficiently thick layer of glue and avoid glass to metal contact, do not press too hard when gluing. Leave to dry for 5 minutes. Mount the fixing and finish assembly. If necessary, clean with Foam Glass Clean Plus.
  • Cleaning of materials used: With Innotec Multisol
  • Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
  • Shelf life: 1 year in original, unopened packaging
  • Storage conditions: Store cool and dry
  • Type of batchcode: A
  • Other details: See also the technical information sheet of Aero-Bond (Aero-Bond). Only obtainable as set: Aero-Bond Set.

Only quality has a future