Multi Seal 400 ml Opaque

Description

Multi Seal is a neutral-curing, permanently elastic sealant, e.g. for sanitary, glazing and façade joints. Multi Seal combines a high durable movement absorption with a high elastic recovery capacity. It has very good adhesion to many surfaces such as stone, concrete, ceramic and glazed tiles, mirrors, glass, wood, metals and many plastics. Not suitable for natural stone (Innotec recommends Easy Seal XS for this).

Thanks to its long open time, Multi Seal is ideal not only for sanitary applications but also for sealing various facade and glazing joints in larger works.
Since the product retains its elasticity, it is perfectly suited for being used in applications subject to a movement (of maximum 25%).
Due to its neutral composition, it does not affect metals in e.g. bathroom or kitchen. After curing, the product gives a beautiful and deep UV resistant shine.

Multi Seal is part of the Innotec joint and sealant system. In combination with Innotec Back Fill Foam, Seal Guard and Seal Fluid, this system is the perfect solution for seams and joints subject to high deformations.

Properties

• Permanently elastic.
• Low-odour, solvent- and MEKO-free.
• Good adhesion to most surfaces.
• Primerless application.
• Easy to process, long smoothing time (± 30 minutes).
• Does not string.
• Sanitary properties and good UV resistance.
• Temperature range from -40°C to +120°C.
• EMICODE EC1 Plus certified (licence number 12156/25.04.13).
• Not suitable for natural stone.

Instructions for use

• Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Multisol or Innotec Seal and Bond Remover. Plastic, porous or extremely difficult surfaces must be pre-treated with Innotec Repaplast Primer ou Innotec Seal Guard.
• Application method: Use foil packs in the specially designed glue gun (Multi Gun 400 or Air Sealant Applicator 400). If necessary smooth with Innotec Seal Fluid.

Technical information

• Base: Alcoxy
• Density: ± 1025 kg/m³
• Consistency: Pasty
• Solvents: No solvents
• Hardness: 17 (Shore A)
• Tensile strength: ± 0,90 N/mm² (according to DIN 53504)
• Elongation at break (%): ± 445% (according to DIN 53504)
• Modulus: ± 0,35 N/mm² (at 100% elongation) (according to DIN 53504)
• Elastic recovery: ± 100%
• Temperature resistance: -40°C to +120°C
• UV resistance: Very good
• Water resistance: Very good
• Solvent resistance: Good. Discolouration may occur when coming into contact with various solvents.
• Fungus resistance: Very good
• Slump resistance (stability): Good
• Tests: EMICODE EC1 Plus certified (licence number 12156/25.04.13)
• Application conditions: +5°C to +30°C
• Type of surface: The most common building materials such as concrete, ceramic and glazed tiles, mirrors, glass, wood, metal and many plastics (NOT SUITABLE FOR NATURAL STONE)
• Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Multisol or Innotec Seal and Bond Remover. Plastic, porous or extremely difficult surfaces must be pre-treated with Innotec Repaplast Primer ou Innotec Seal Guard.
• Application method: Use foil packs in the specially designed glue gun (Multi Gun 400 or Air Sealant Applicator 400). If necessary smooth with Innotec Seal Fluid.
• Skin formation: 30 minutes (at 23°C / 50% relative humidity)
• Tack free: After a few hours (at 23°C / 50% relative humidity)
• Curing time: ± 2 mm in 24 hours (at 23°C / 50% relative humidity)
• Minimum joint width: 4 mm
• Maximum joint width: 20 mm
• Maximum joint depth: Advice: maximum joint depth = (joint width / 3) + 6 mm
• Maximum admissible deformation: 25%
• Paintability: Not paintable
• Cleaning of materials used: With Innotec Multisol
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 1 year in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• Other details: Not suitable for natural stone
• CE Certification: Multi Seal is a product with CE mark in accordance with Regulation (EU) 305/2011:
  CE EN 15651-1:2012, F INT-EXT-CC 25LM
  CE EN 15651-2:2012, G-CC 25LM
  CE EN 15651-3:2012, XS1
  The corresponding Declaration of Performance (DoP no 0111400100) can be downloaded from our website.
• EAN Code: 5400563038703