Solid Spray Filler

Art.: 02.1200.9999
Aerosol can 500 ml

Solid Spray Filler is a high-quality fine spray filler with a very high solid content. Thanks to its special composition, this product has an unprecedentedly high filling power and outstanding sandability.

More info
This product is currently not available for order.
Please contact your local distributor.

Safety data sheet

To order, please contact your distributor

Description

Solid Spray Filler is a high-quality fine spray filler with a very high solid content. Thanks to its special composition, this product has an unprecedentedly high filling power and outstanding sandability.

Solid Spray Filler offers perfect adhesion to just about any type of surface such as metal, wood, plaster, and most plastics, as well sanded layers of lacquer. The product is ideal for filling irregularities, little holes and deeper sanding scratches.

Solid Spray filler is perfectly suited to the filling of irregularities caused by minor damage and for smoothing off textured parts. With damage of this type it is often difficult to use a spray gun, because it usually requires just a small amount of product. As a result, and because you can use the spray can in just about any place, Solid Spray Filler is an ideal solution for a business that does not have its own spray booth.

The product has a very high solid content and excellent fluidity. Due to its fast drying Solid Spray Filler is dust dry after just 10 minutes, and sandable after 25 minutes. The product must always be sealed with a base layer, and we recommend Innotec Speed Primer for this.

Solid Spray Filler is supplied in an original pink colour. This means the product can be easily sprayed with a base layer, thereby reducing the risk of the colour bleeding through.

Thanks to its aerosol packaging Solid Spray Filler is extremely user-friendly and easy to apply. The product has a special nozzle which gives a spray pattern exactly like the cone of a spray gun. The nozzle is adjustable, so that the product can be sprayed horizontally and vertically.

Properties

  • Ideal for application on ferrous and non-ferrous metals.
  • Excellent adhesion to most plastics, wood, putty, etc.
  • Ideal for filling irregularities and deeper sanding scratches.
  • Very suited to smoothing textured surfaces.
  • Professional flat fan spray pattern with adjustable nozzle.
  • Excellent fluidity.
  • Fast drying.
  • Perfectly sandable.

Instructions for use

  • Surface preparation: The surface must be clean, dry and free of dust and grease. Sand the surface. Clean surfaces with Innotec Multisol. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic and pre-treat with Innotec Repaplast Primer.
  • Application method: Shake can well during at least 2 minutes before use. Spraying distance 20 cm. Apply in several thin layers. When applying several layers leave 5 minutes between each layer for the product to evaporate. After use invert can and spray until clear to clean the nozzle.

Technical information

  • Base: Pure acrylate
  • Density: 980 kg/m³
  • Consistency: Liquid (ready-to-use in aerosol)
  • Solvents: Mixture of aromatic and aliphatic solvents
  • Flash point: < 0°C
  • Temperature resistance: -20°C to +110°C
  • Solvent resistance: Moderate
  • Application conditions: +15°C to +30°C
  • Type of surface: Sanded layers of old paint, metal, all non-ferrous metals, aluminium, wood, MDF, galvanized metal, plaster and most common plastics
  • Surface preparation: The surface must be clean, dry and free of dust and grease. Sand the surface. Clean surfaces with Innotec Multisol. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic and pre-treat with Innotec Repaplast Primer.
  • Application method: Shake can well during at least 2 minutes before use. Spraying distance 20 cm. Apply in several thin layers. When applying several layers leave 5 minutes between each layer for the product to evaporate. After use invert can and spray until clear to clean the nozzle.
  • Dust dry: After ± 10 minutes (at 20°C)
  • Curing time: 60 minutes (at 20°C / 65% relative humidity / 30µ layer thickness)
  • Recommended layer thickness: 30µ
  • Sandability: After ± 25 minutes (at 20°C)
  • Paintability: After ± 25 minutes (at 20°C) Solid Spray Filler is compatible with almost all modern groundcoat systems. Due to the huge variety of paint types on the market, it is best to test the paint beforehand. Always seal with a base layer.
  • Cleaning of materials used: With Innotec Multisol
  • Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
  • Shelf life: 2 years in original, unopened packaging
  • Storage conditions: Store cool and dry
  • Type of batchcode: F
  • EAN Code: 5400563008522

Only quality has a future