Industrial Floor Cleaner 1 l

Description

Industrial Floor Cleaner is a powerful floor cleaner for removing grease, oil, soot and mineral contaminants from hard, water-resistant floors. Low foaming and therefore ideal for scrubber dryers. Concentrated ECO formula, as effective as conventional products.

Industrial Floor Cleaner is a highly concentrated alkaline floor cleaner for industrial applications. The Innotec floor cleaner is extremely suitable for removing heavy soiling from all alkali- and water-resistant floors such as concrete, tiles and all kinds of industrial coatings.

Due to its ecological surfactants, Industrial Floor Cleaner has obtained the exclusive EU Ecolabel that is accepted throughout the European Union. The ecological formula is made from renewable raw materials and is fully biodegradable within 28 hours.

Industrial Floor Cleaner has been specially developed for being used in scrubber dryers with a concentration of only 0.5 to 1%. When used manually, higher concentrations can be used to locally dissolve very heavy soiling.

Industrial Floor Cleaner is available in an easy-to-handle 1 litre packaging with ergonomic dosing system as well as in a 5 litre bulk packaging.

Properties

• Industrial floor cleaner for alkali- and water-resistant floors.
• Highly concentrated ECO formula.
• Very powerful cleaning for soiling such as soot, oil, grease and mineral contamination.
• Specially developed for scrubber dryers.
• Very low foaming character.
• Dilute 1 litre of concentrate with 100 to 200 litres of water.
• Also suitable for manual processing.
• pH 13.
• Pleasant citrus scent.
• Made from natural raw materials.
• EU Ecolabel certification.
• Fully biodegradable within 28 hours.
• Available in 1 litre and 5 litre packaging.

Instructions for use

• Type of surface: All alkali- and water-resistant floors. Do not use on aluminium, painted surfaces, natural stone, slate, wood, linoleum or unsealed parquet floors.
• Application method: Test in advance on a non-visible area.
  Dosage: minimum 0,5% (1/200), maximum 1% (1/100)
  
  Scrubber dryer: Dose the product and add it to the full water tank. Clean the floor according to the scrubber dryer instructions. Do not allow the solution to dry on the floor! Remove the polluted water and empty the scrubber dryer after use.
  
  Manual: Dose the product and add it to a bucket of water. Apply the solution to the floor by means of a pressure sprayer, pressure washer, mop or brush. Allow to act for 5-10 minutes. Use sufficient solution so that the surfaces remain wet during this time. Do not allow to dry! Remove the polluted water. In case of extreme soiling, a maximum dosage of 10% (1/10) is possible, subsequent rinsing with clean water is then required.

Technical information

• Base: Potassium hydroxide, amphoteric and non-ionic surfactants
• Density: ± 1100 kg/m³
• Consistency: Liquid
• pH: pH undiluted: 13
  pH diluted: 12 (1% with water)
• Application conditions: +5°C to +30°C
• Type of surface: All alkali- and water-resistant floors. Do not use on aluminium, painted surfaces, natural stone, slate, wood, linoleum or unsealed parquet floors.
• Application method: Test in advance on a non-visible area.
  Dosage: minimum 0,5% (1/200), maximum 1% (1/100)
  
  Scrubber dryer: Dose the product and add it to the full water tank. Clean the floor according to the scrubber dryer instructions. Do not allow the solution to dry on the floor! Remove the polluted water and empty the scrubber dryer after use.
  
  Manual: Dose the product and add it to a bucket of water. Apply the solution to the floor by means of a pressure sprayer, pressure washer, mop or brush. Allow to act for 5-10 minutes. Use sufficient solution so that the surfaces remain wet during this time. Do not allow to dry! Remove the polluted water. In case of extreme soiling, a maximum dosage of 10% (1/10) is possible, subsequent rinsing with clean water is then required.
• Cleaning of materials used: With water
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 18 months in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• EAN Code: 5400563037782