Colour

Description

Colour is part of the Innotec Stone Chip Repair System and is a special, nitro alkyd acrylate based paint. Due to its special composition the product has excellent fill and adhesion properties, and is extremely fast-drying. The available colours allow us to repair 80% of all car paints.

See also:
Stone Chip Repair System
Stone Chip Repair System Compact

Properties

No product information available

Instructions for use

• Surface preparation: The surface must be clean, dry and free of grease. Clean surface with Innotec Adhesion Activator.
• Application method: Shake the jar well before use. Use a paint brush to apply thin layers over the damaged area. When applying several layers leave 5 minutes between each layer for the product to evaporate. After at least 10 minutes and no more than 60 minutes remove excess paint using Innotec Repair Finish, Polish Block, Blue Plastic Card and Multi Wipes.
  See also the directions for use of the Innotec Stone Chip Repair Systems.

Technical information

• Base: Cellulose-nitrate resin, pigments and additives in solvent
• Density: 980 kg/m³
• Consistency: Liquid
• Viscosity: 25 to 30 seconds (DIN Cup 4, 20°C)
• Solvents: Ketones and esters
• Flash point: < 0°C
• Temperature resistance: Up to +110°C (short-time limit +150°C)
• UV resistance: Very good
• Water resistance: Good
• Solvent resistance: Reasonable
• Application conditions: +15°C to +25°C
• Type of surface: Almost any modern car paint
• Surface preparation: The surface must be clean, dry and free of grease. Clean surface with Innotec Adhesion Activator.
• Application method: Shake the jar well before use. Use a paint brush to apply thin layers over the damaged area. When applying several layers leave 5 minutes between each layer for the product to evaporate. After at least 10 minutes and no more than 60 minutes remove excess paint using Innotec Repair Finish, Polish Block, Blue Plastic Card and Multi Wipes.
  See also the directions for use of the Innotec Stone Chip Repair Systems.
• Dust dry: ± 5-10 minutes (at 20°C)
• Curing time: ± 24 hours (at 20°C)
• Recommended layer thickness: The same depth as the stone chip damage
• Cleaning of materials used: With Innotec Thinning Agent
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 3 years in original, unopened packaging
• Storage conditions: Store cool and dry