Alu Scratch Repair Activator

Description

Alu Scratch Repair Activator is part of the Innotec Alu Scratch Repair System and is only used for accelerating the curing of Alu Scratch Repair.

Alu Scratch Repair Activator comes in a handy 150 ml aerosol can.

See also: Alu Scratch Repair System

Properties

No product information available

Instructions for use

• Surface preparation: The surface must be clean, dry and free of grease. Clean the repair area using Innotec Repaplast Cleaner Antistatic (allow to evaporate for 5 minutes).
• Application method: Wait 30 seconds, then spray a thin layer of Alu Scratch Repair Activator over the part repaired with Innotec Alu Scratch Repair. After this, hardening will take place within a few seconds.

Technical information

• Base: Aliphatic hydrocarbon
• Density: 700 kg/m³
• Consistency: Thin liquid
• Viscosity: ± 25 mPa.s
• Solvents: Mixture of aliphatics
• Flash point: < 0°C
• Application conditions: +5°C to +35°C
• Type of surface: Almost all aluminium and metal surfaces
• Surface preparation: The surface must be clean, dry and free of grease. Clean the repair area using Innotec Repaplast Cleaner Antistatic (allow to evaporate for 5 minutes).
• Application method: Wait 30 seconds, then spray a thin layer of Alu Scratch Repair Activator over the part repaired with Innotec Alu Scratch Repair. After this, hardening will take place within a few seconds.
• Cleaning of materials used: With Innotec Multisol
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 3 years in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• EAN Code: 5400563000250