Ceramic Grease

Description

Ceramic Grease is a durable, high-quality ceramic grease. It has been specially developed for applications requiring high pressure and temperature resistance.

Thanks to its unique composition the product does not liquefy under extreme circumstances. Because the product prevents seizing and unpleasant sounds it is ideal for brake blocks, exhaust systems, wheel nuts and machine parts. Because, in contrast to traditional copper grease, Ceramic Grease does not contain metal, it is not conductive and is therefore perfectly suited to ABS braking systems.

Ceramic Grease is free of silicones and metal, as a result of which the product meets the environmental regulations on the use of heavy metals. Thanks to its ceramic particles the product has a superior pressure and temperature resistance range. The ceramic particles remain intact above the decomposition temperature of the grease and the mineral oils. They take over the lubrication, thereby preventing seizing and other damage.

Ceramic Grease is also extremely well suited to greasing nuts and bolts during disassembly. It does not become brittle in high temperatures and its very good resistance to water and acids gives it rust prevention characteristics, thereby guaranteeing good protection against the effects of dirt and moisture. When Ceramic Grease is used, nuts and bolts are much easier to free afterwards.

Because the product is metal-free it also works as an insulator between different metals, thereby preventing contact corrosion. This is particularly the case when assembling rims.

Ceramic Grease is available in two types of packaging; in an aerosol can and in a dual chamber pressure can.

The 2 chamber pressure can is less harmful to the environment and guarantees a long pot life. The special valve prevents blockages of the nozzle and does not break off. It also makes it possible to operate the can with one hand. By mounting the supplied brush (Brush - AS 1500 / Ceramic Grease) to the nozzle the product can be dosed perfectly, making nuts and bolts extremely easy to grease.

The aerosol packaging is extremely user-friendly and easy to apply. When being applied the product initially is liquid, so it can penetrate deeply between the parts. After the propellant has evaporated away it leaves a beautiful, solid and pressure-resistant grease behind. The extra nozzle and tube supplied with the product make it very easy to apply in places which are difficult to access.

Properties

• Works as an insulator between connections of different metals.
• Metal-free, and therefore safe for ABS, ASR and ESP systems.
• Resistant to temperatures up to 1500°C.
• Pressure resistance up to 260 kg (according to IP-239).
• Consistency according to NLGI: 1-1.5.
• Rust-preventing (B according to SKF Emcor).
• Resistant to water and acids.
• Prevents seizure of stainless steel connections.
• Optimal lubrication, even in extreme circumstances.
• Can be applied very precisely using the handy brush applicator.

Instructions for use

• Surface preparation: The surface must be clean, dry, free of grease and non-corroded. Clean surfaces with Innotec Multisol, Innotec Ultra Clean or Innotec Power Clean.
• Application method: Apply directly from the packaging to the part for lubrication using the special nozzle and brush.

Technical information

• Base: Calcium complex grease with ceramic micro particles, oxidation and corrosion inhibitors
• Density: 689 kg/m³
• Consistency: Pasty
• Viscosity: 1 to 1,5 (according to NLGI)
• Flash point: > 250°C
• Pressure resistance: 4 ball welding load: 260 kg (according to IP-239)
• Temperature resistance: -20°C to +150°C
• Peak temperature resistance: +1500°C
• Drop point: ± 180°C
• Water resistance: Good, for condensation moisture and water spray
• Acid resistance: Good
• Corrosion resistance: Good (B according to SKF Emcor)
• Mechanical stability: Good
• Penetration ability: Moderate
• Application conditions: -10°C to +40°C
• Type of surface: All kind of metals
• Surface preparation: The surface must be clean, dry, free of grease and non-corroded. Clean surfaces with Innotec Multisol, Innotec Ultra Clean or Innotec Power Clean.
• Application method: Apply directly from the packaging to the part for lubrication using the special nozzle and brush.
• Cleaning of materials used: With Innotec Multisol or Innotec Power Clean
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 2 years in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• Other details: Not suitable for use in roller bearings
• EAN Code: 5400563015216