Acti-Prim

Art.: 01.0634.6100 Transparent

Acti-Prim is a unique transparent activator / primer in a durable pen designed to allow difficult substrates to be repaired and bonded in a clean and professional manner.

More info
This product is currently not available for order.
Please contact your local distributor.

Safety data sheet

To order, please contact your distributor

Description

Acti-Prim is a unique transparent activator / primer in a durable pen designed to allow difficult substrates to be repaired and bonded in a clean and professional manner.

Acti-Prim optimizes the adhesion of cyanoacrylate adhesives, such as Clear Bond, Quick Bond and Fast Glue 1+3, and accelerates the drying process of this type of adhesives. An additional advantage of this pen is that it is not classified as dangerous according to the European law on chemicals.

Properties

  • Activator and primer in 1, so optimum preparation of the bonding surface.
  • Can be applied in a clean and dry way.
  • Primer for very difficult-to-bond surfaces.
  • Accelerates the drying process of Innotec Clear Bond, Quick Bond, Fast Glue 1 and 3.
  • Free of hazard symbols.

Instructions for use

  • Surface preparation: The surface must be clean, dry and free of grease. Clean the bonding surfaces with Repaplast Cleaner Antistatic and allow to evaporate for 10 minutes.
  • Application method: Open the pen, apply Acti-Prim on one of the sides to be bonded, and then allow to evaporate for 30 seconds. Apply cyanoacrylate adhesive (e.g. Innotec Clear Bond, Quick Bond, Fast Glue 1+3) on the other side and join both parts together within 60 seconds. Allow the bond to dry for 5 to 10 minutes (depending on the type of substrate) before exposing it to loads.

Technical information

  • Base: Alcohols and organic solvents
  • Consistency: Pen
  • Application conditions: +5°C to +35°C
  • Type of surface: Almost all surfaces
  • Surface preparation: The surface must be clean, dry and free of grease. Clean the bonding surfaces with Repaplast Cleaner Antistatic and allow to evaporate for 10 minutes.
  • Application method: Open the pen, apply Acti-Prim on one of the sides to be bonded, and then allow to evaporate for 30 seconds. Apply cyanoacrylate adhesive (e.g. Innotec Clear Bond, Quick Bond, Fast Glue 1+3) on the other side and join both parts together within 60 seconds. Allow the bond to dry for 5 to 10 minutes (depending on the type of substrate) before exposing it to loads.
  • Dust dry: ± 60 seconds
  • Recommended layer thickness: 1 thin closed layer
  • Shelf life: 2 years in original, unopened packaging
  • Storage conditions: Store cool, dry and frostfree
  • Type of batchcode: F
  • Other details: The pen is not refillable.
  • EAN Code: 5400563001318

Only quality has a future