Deblock Oil XS

Art.: 03.1107.9999
Aerosol can 500 ml

Deblock Oil XS is a mix of quick rust dissolvers and lubricants, which is far more effective than ordinary penetrating oils. Thanks to very specific ingredients, the product provides, under extreme shear stress, such as when loosening rusty bolts or nuts, high quality interfacial lubrication to prevent re-seizing during disassembly.

More info
This product is currently not available for order.
Please contact your local distributor.

Safety data sheet

To order, please contact your distributor

Description

Deblock Oil XS is a mix of quick rust dissolvers and lubricants, which is far more effective than ordinary penetrating oils. Thanks to very specific ingredients, the product provides, under extreme shear stress, such as when loosening rusty bolts or nuts, high quality interfacial lubrication to prevent re-seizing during disassembly.

Thanks to the slowly evaporating solvents, Deblock Oil XS can also be used in situations where a long-term creep is required and even release extremely rusted screw connections.

The product can be applied to all types of metal, also to sensitive joints, such as steel bolts in aluminium, to prevent damage when unscrewing. 

Thanks to the unbreakable nozzle with straw, even hard-to-reach places can be treated without any problem. In addition, the aerosol is equipped with a special valve that allows it to be used in any position. This is a huge advantage because many mounting points are difficult to access or located underneath an object.

Properties

  • Quickly loosens seized parts.
  • Quick effect on rust, dirt, etc.
  • Does not adversely affect rubber.
  • Repels moisture.
  • Absorbs extreme shear loads and thus provides additional lubrication during disassembly.
  • Ideal for difficult applications such as aluminium/steel joints.

Instructions for use

  • Surface preparation: The surface must be clean, dry and free of grease.
  • Application method: Shake well before use. Spray directly on part for treatment. Let it penetrate for at least 2-3 minutes and turn the part loose. If necessary, repeat treatment.

Technical information

  • Base: Mineral oil dissolved in a mixture of solvents and Molybdenum disulfide (MoS2)
  • Density: 820 kg/m³
  • Consistency: Liquid (ready-to-use in aerosol)
  • Viscosity: ± 2-3 mPa.s (20°C)
  • Flash point: < 0°C
  • Pressure resistance: Extremely good, due to MoS2 content. Not suited, however, under constantly extremely severe circumstances.
  • Temperature resistance: -180°C to +400°C
  • Water resistance: Good. Contains waterresistant additions.
  • Penetration ability: Very good
  • Percentage of greasing agent: ± 14%
  • Application conditions: -20°C to +40°C
  • Type of surface: All kind of metals
  • Surface preparation: The surface must be clean, dry and free of grease.
  • Application method: Shake well before use. Spray directly on part for treatment. Let it penetrate for at least 2-3 minutes and turn the part loose. If necessary, repeat treatment.
  • Cleaning of materials used: With Innotec Multisol or Innotec Power Clean
  • Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
  • Shelf life: 2 years in original, unopened packaging
  • Storage conditions: Store cool and dry
  • Type of batchcode: F
  • EAN Code: 5400563035702 (art. 03.1107.9999)
    5400563036365 (art. 03.1107.9999.SIE)

Only quality has a future