Cavity Wax 1 l

Description

Cavity Wax is a very durable, transparent, silicone-free, self-healing, not fully curing bodywork protection with excellent creep properties. As a result, during application, the product will flow into all (folded) seams of cavities and flatter surfaces, leaving an optimum preservative and rust-preventing wax layer. Thanks to the addition of a UV indicator, the presence of Cavity Wax can always be checked.

Due to its special chemical composition, Cavity Wax has an extremely high temperature resistance up to 150°C, which prevents it from dripping.

Cavity Wax is used during the construction or repair of vehicles to protect metal and sheet metal against corrosion. It is often applied to the inside of doors, chassis beams, body parts, etc.

Cavity Wax is available in two packaging types: a 500 ml spray and a 1 l screw-top can.
The 500 ml aerosol provides optimal ease of use. Thanks to the included nozzle with straw, even hard-to-reach areas can be treated easily, and for optimal application in cavities, a 120 cm long tube is supplied.
Application from the 1 l screw-top can is done using the Wax Applicator.

Properties

• Very good flow qualities during application.
• No dripping after application.
• Perfect protection against corrosion.
• Aromatic/silicone free, almost odourless.
• Temperature resistant up to +150°C.
• Highly resistant to brake fluid and salt.
• Does not affect plastic & rubber parts.
• Contains a UV indicator.

Instructions for use

• Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Multisol or Innotec Seal and Bond Remover.
• Application method: Shake well before use. Apply in an even, closed layer using the Wax Applicator (max 6 bar).

Technical information

• Base: Dispersion of calcium sulfonate
• Density: 745 kg/m³
• Consistency: Liquid
• Solvents: Mixture of solvents
• Flash point: 62°C (according to DIN 53213)
• Temperature resistance: -40°C to +150°C
• Water resistance: Excellent
• Solvent resistance: Soluble in hydrocarbons
• Tests: Salt spray test (according to ISO 9227): excellent after 3850 hours, Ri 0 at 100µ dry layer
• Application conditions: +15°C to +35°C
• Type of surface: Metal
• Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Multisol or Innotec Seal and Bond Remover.
• Application method: Shake well before use. Apply in an even, closed layer using the Wax Applicator (max 6 bar).
• Dust dry: Remains sticky
• Curing time: 2-4 hours at 20°C / 65% relative humidity
• Recommended layer thickness: A dense and evenly sprayed layer of ±150µ (wet)
• Sandability: Not sandable
• Paintability: Not paintable
• Cleaning of materials used: With Innotec Multisol
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 1 year in original, unopened packaging
• Storage conditions: Store cool and dry (min. 15°C)
• Type of batchcode: F
• Other details: Contains UV indicator
• Colour: Transparent
• EAN Code: 5400563039274