Innogrease STF 300 400 g (LS)

Description

Innogrease STF 300 is an extremely high-quality and versatile NLGI-2 lithium complex grease with TRIBITEC technology, which guarantees excellent lubrication even under high pressure and temperature loads.

The revolutionary TRIBITEC technology is PTFE-free and uses active TRIBITEC additives to create an extremely durable protective layer. This protects the surfaces to be lubricated against high shear forces and makes them highly resistant to wear caused by friction.

Thanks to its high-quality complex in combination with the active additives, Innogrease STF 300 offers reliable and consistent performance over a wide temperature range from -30°C to +150°C.

In addition, Innogrease STF 300 will not saponify due to its water-repellent formulation and provides active protection against corrosion. This makes the product perfectly suited for applications exposed to all kinds of weather conditions.

Innogrease STF 300 is a versatile efficiency enhancer, allowing you to extend your lubrication intervals and reduce workshop time.

Properties

• PTFE-free TRIBITEC technology.
• High-quality NLGI-2 lithium complex grease.
• Active additives form a durable coating on the surfaces to be lubricated.
• Wide temperature range from -30°C to +150°C.
• Good corrosion protection due to water-repellent properties and non-saponifying.
• Suitable for high pressure applications.
• Widely applicable.
• Less maintenance due to extended lubrication intervals.

Instructions for use

• Surface preparation: The surface must be clean, dry, free of grease and non-corroded. Clean surfaces with Innotec Multisol, Innotec Ultra Clean or Innotec Power Clean.
• Application method: Apply to grease nipples with the Innotec Lube Shuttle Gun or Lube Shuttle One-Hand Gun. For larger sliding surfaces, the Innotec Grease Applicator is the best, fastest and cleanest solution.

Technical information

• Base: Lithium complex
• Density: 910 kg/m³
• Consistency: Pasty (solid)
• Viscosity: 2 (according to NLGI)
• Flash point: > 150°C
• Pressure resistance: 4-ball weld load (DIN 51350:4): 3000 N
• Temperature resistance: -30°C to +150°C
• Peak temperature resistance: 230°C
• Drop point: > 260°C
• Water resistance: Very good (DIN 51807:1 1, 90°C)
• Saltwater resistance: Good
• Acid resistance: Resistant to diluted acids
• Corrosion resistance: ≤ 2-2 (ISO 11007)
• Mechanical stability: Good
• Percentage of greasing agent: 100%
• Application conditions: -10°C to +40°C
• Type of surface: Almost all kinds of surfaces
• Surface preparation: The surface must be clean, dry, free of grease and non-corroded. Clean surfaces with Innotec Multisol, Innotec Ultra Clean or Innotec Power Clean.
• Application method: Apply to grease nipples with the Innotec Lube Shuttle Gun or Lube Shuttle One-Hand Gun. For larger sliding surfaces, the Innotec Grease Applicator is the best, fastest and cleanest solution.
• Cleaning of materials used: With Innotec Multisol or Innotec Power Clean
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 1 year in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• EAN Code: 5400563039045