Glass/Body Primer

Art.: 02.0441.0000 Black
Jar 30 ml

Glass/Body Primer is a black UV resistant primer that can be used for repairing damage to the ceramic edge of windscreens of for retouching damaged window rabbets to which the windscreen sealant will have to adhere. Moreover it is suited for both optical and protective applications, especially at places where UV protection is required.

More info
This product is currently not available for order.
Please contact your local distributor.

Safety data sheet

To order, please contact your distributor

Description

Glass/Body Primer is a black UV resistant primer that can be used for repairing damage to the ceramic edge of windscreens of for retouching damaged window rabbets to which the windscreen sealant will have to adhere. Moreover it is suited for both optical and protective applications, especially at places where UV protection is required.

Properties

  • Provides excellent adhesion.
  • Offers good UV protection.
  • Corrosion resistant and therefore suited to retouch damaged window seals.
  • Easy to apply with Applicators.
  • Fast drying.

Instructions for use

  • Surface preparation: The surface must be clean, dry and free of grease. Cut away the old sealant layer up to a thickness of ± 2 mm. Clean the edge of the windscreen with Innotec Multisol.
  • Application method: Shake the jar well before use. Apply Glass/Body Primer with a cotton wool to the ceramic edge of the windscreen. Treat any damage to the rebate with Glass/Body Primer. If there are no remains of old sealant in the rebate, clean with Innotec Multisol and treat with Glass/Body Primer. Allow to dry for at least 10 minutes.

Technical information

  • Base: Butanone, butyl acetate and polyurethane
  • Density: 980 kg/m³
  • Consistency: Liquid
  • Viscosity: ± 10-15 mPa.s
  • Solvents: Butanone and butyl acetate
  • Flash point: < 0°C
  • Temperature resistance: -30°C to +100°C
  • Percentage of solids: ± 35%
  • Application conditions: +10°C to +30°C
  • Type of surface: Glass, ceramic edge of vehicle windscreens and painted surface
  • Surface preparation: The surface must be clean, dry and free of grease. Cut away the old sealant layer up to a thickness of ± 2 mm. Clean the edge of the windscreen with Innotec Multisol.
  • Application method: Shake the jar well before use. Apply Glass/Body Primer with a cotton wool to the ceramic edge of the windscreen. Treat any damage to the rebate with Glass/Body Primer. If there are no remains of old sealant in the rebate, clean with Innotec Multisol and treat with Glass/Body Primer. Allow to dry for at least 10 minutes.
  • Open time: ± 30 minutes
  • Drying time: ± 10 minutes
  • Recommended layer thickness: Even, covering layer
  • Cleaning of materials used: With Innotec Multisol
  • Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
  • Shelf life: 9 months in original, unopened packaging
  • Storage conditions: Store cool and dry
  • Type of batchcode: F
  • Other details: Glass/Body Primer has good UV resistance combined with a ceramic edge of vehicle windscreens.
  • Remarks: As from 24 August 2023 adequate training is required before industrial or professional use.
    Further information available at www.feica.eu/PUinfo
  • EAN Code: 5400563008027

Only quality has a future