Hi-Temp Wax Pro 60 l Black

Art.: 02.2429.0000 Black
Barrel 60 l
THIS ARTICLE HAS BEEN REMOVED FROM OUR PRODUCT RANGE!

Any related information will automatically be removed from the site after the expiry date of the last sold products.

Hi-Temp Wax Pro is a very durable underbody & cavity coating based on saponified fatty acids that provides excellent rust protection for sheet metal parts and cavities in OEM quality. It has an excellent penetration and water-repellent power which enables it to soak into the smallest gaps and thus reliably protect the surface for a long time.

More info
This product is currently not available for order.
Please contact your local distributor.

Safety data sheet

To order, please contact your distributor

Description

Hi-Temp Wax Pro is a very durable underbody & cavity coating based on saponified fatty acids that provides excellent rust protection for sheet metal parts and cavities in OEM quality. It has an excellent penetration and water-repellent power which enables it to soak into the smallest gaps and thus reliably protect the surface for a long time.

Due to its special chemical composition Hi-Temp Wax Pro has an extremely high temperature resistance. The product remains absolutely stable up to a temperature of 170°C. Due to its very high temperature resistance Hi-Temp Wax Pro is extremely well suited for use in the engine compartment of the vehicle and in engine rooms - the product will not run off.
Hi-Temp Wax Pro can be used to protect metal and sheet metal against corrosion during construction or repairs. The product is mostly applied to the inside of doors, chassis parts, beams, etc.

Hi-Temp Wax Pro can also be applied with effect to protect power points, battery poles and other electrical components subject to the effects of weather, dampness, dirt and salt. Hi-Temp Wax Pro ensures that these parts are highly water-repellent, as a result of which faults due to permeating dampness or corrosion can be kept to a minimum.

Hi-Temp Wax Pro is available in different types of packaging: in a 1 litre can, a 60 litre barrel and a 200 litre barrel.

Hi-Temp Wax Pro barrels can be sprayed using a traditional gun with refill cup (4-6 bar) or with a low pressure sprayer such as the InnoQuip Multi Sprayer 1,3 l or Multi Sprayer 10 l.

Properties

  • Good flow qualities during application.
  • No long-term dripping after application.
  • Perfect protection against rust.
  • High temperature resistance (up to +170°C). The product does not return to liquid state even in extremely hot conditions.
  • Not sensitive to many chemicals such as brake oil, salt, etc.
  • OEM approved.
  • Perfectly sprayable with a low pressure sprayer, e.g. the InnoQuip Multi Sprayer 1,3 l or Multi Sprayer 10 l.

Instructions for use

  • Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Multisol or Innotec Seal and Bond Remover.
  • Application method: Shake or stir well before use. Spray with a traditional gun with refill cup (4-6 bar) or with a low pressure sprayer such as the InnoQuip Multi Sprayer 1,3 l or Multi Sprayer 10 l. Spraying distance 25-30 cm. Apply a dense and evenly sprayed layer.

Technical information

  • Base: Soaped grease acids
  • Density: 860 kg/m³
  • Consistency: Liquid
  • Solvents: Mixture of aromatic-free solvents and additives
  • Flash point: 61°C (according to DIN 53213)
  • Temperature resistance: -40°C to +170°C (melting point 170°C)
  • Water resistance: Excellent
  • Tests: Salt spray test (according to DIN 50021): excellent after 3850 hours, Ri 0 at 100µ dry layer
  • Application conditions: +15°C to +35°C
  • Type of surface: Ferrous and non-ferrous metals
  • Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Multisol or Innotec Seal and Bond Remover.
  • Application method: Shake or stir well before use. Spray with a traditional gun with refill cup (4-6 bar) or with a low pressure sprayer such as the InnoQuip Multi Sprayer 1,3 l or Multi Sprayer 10 l. Spraying distance 25-30 cm. Apply a dense and evenly sprayed layer.
  • Dust dry: Remains somewhat sticky.
  • Curing time: (± 100µ) 4-6 hours at 20°C / 65% relative humidity
    Note: The drying process can be strongly influenced by exposing the applied material to a gooed ventilation and/or air flow.
  • Recommended layer thickness: 200µ to 250µ wet (dense layer)
  • Cleaning of materials used: With Innotec Multisol
  • Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
  • Shelf life: 2 years in original, unopened packaging
  • Storage conditions: Store cool and dry
  • Type of batchcode: F
  • Other details: OEM approved
  • EAN Code: 5400563009512

Only quality has a future