Xpress Clay Glove

Description

Xpress Clay Glove is an advanced clay glove based on a specially developed polymer rubber with honeycomb structure. It removes industrial contamination, surface rust, spray mist and any other stubborn dirt that does not disappear with washing.

With the development of the Xpress Clay Glove, we have succeeded in significantly modernizing and, above all, simplifying the claying process. This new generation of clay glove based on a specially developed polymer rubber has an optimal structure so that contamination can be removed safely and easily and therefore does not end up between the polymer rubber and the surface.

The Xpress Clay Glove quickly and safely removes all kinds of dirt (e.g. tree resin, spray mist, ...) from the bodywork, so that the paint feels smooth again. However, this unique clay glove is also perfect for thoroughly cleaning the car windows. A quick and easy alternative to the traditional clay bar.

Always use the clay glove in combination with warm water and Xpress Wash as a lubricant, to make the polymer rubber slide easier over the surface!

Properties

• Optimal structure for fast paint cleaning.
• Can be used on almost all 2K car paints and car windows.
• By exerting moderate / controlled pressure on the glove, the step of having to polish after the claying process can be avoided.

Instructions for use

• Surface preparation: The surface must be clean and free of dust and grease.
• Application method: Always use in combination with Xpress Wash as a lubricant! Moisten the clay glove with plenty of warm water to which a dose of Xpress Wash has been added. Rub the surface under very light pressure until all contaminants have been removed and the surface feels smooth again.
  ATTENTION: If slight irregularities (chalking) should be visible after the cleaning surface treatment with the clay glove, we advise you to treat the surface with Innotec [ARTICLE: 1322: Easy Polish:]. Use Easy Polish in combination with a professional polishing machine and a fine foam pad to restore the lacquered top layer to its optimum condition.
• Other details: Never wring out the clay glove, as this will damage the polymer rubber.
  Do not machine wash it, just rinse thoroughly with clean water and allow to dry in the air.

Technical information

• Base: 80% polyester / 20% polyamide
• Absorption of moisture and dirt: Very good
• Dimensions: Glove: 22 cm x 14,5 cm
  Polymer surface: 21,5 cm x 14,5 cm
• Solvent resistance: Moderate
• Type of surface: 2K car paints and car windows (only smooth surfaces)
• Surface preparation: The surface must be clean and free of dust and grease.
• Application method: Always use in combination with Xpress Wash as a lubricant! Moisten the clay glove with plenty of warm water to which a dose of Xpress Wash has been added. Rub the surface under very light pressure until all contaminants have been removed and the surface feels smooth again.
  ATTENTION: If slight irregularities (chalking) should be visible after the cleaning surface treatment with the clay glove, we advise you to treat the surface with Innotec [ARTICLE: 1322: Easy Polish:]. Use Easy Polish in combination with a professional polishing machine and a fine foam pad to restore the lacquered top layer to its optimum condition.
• Shelf life: Unlimited in original, unopened packaging. Once the packaging has been opened, the clay glove can be used up to 120 times, depending on the degree of contamination.
• Storage conditions: Between 10°C and 38°C in a dry and clean environment. Do not store the glove damp.
• Other details: Never wring out the clay glove, as this will damage the polymer rubber.
  Do not machine wash it, just rinse thoroughly with clean water and allow to dry in the air.
• EAN Code: 5400563036556