Hi-Temp Wax Spray Transparent

Art.: 02.2116.6100 Transparent
Aerosol can 500 ml

Hi-Temp Wax Spray is a very durable underbody & cavity coating based on saponified fatty acids that provides excellent rust protection for sheet metal parts and cavities in OEM quality. It has an excellent penetration and water-repellent power which enables it to soak into the smallest gaps and thus reliably protect the surface for a long time.

More info
This product is currently not available for order.
Please contact your local distributor.

Safety data sheet

To order, please contact your distributor

Description

Hi-Temp Wax Spray is a very durable underbody & cavity coating based on saponified fatty acids that provides excellent rust protection for sheet metal parts and cavities in OEM quality. It has an excellent penetration and water-repellent power which enables it to soak into the smallest gaps and thus reliably protect the surface for a long time.

Due to its special chemical composition Hi-Temp Wax has an extremely high temperature resistance. The product remains absolutely stable up to a temperature of 150°C. Due to its very high temperature resistance Hi-Temp Wax is extremely well suited for use in the engine compartment of the vehicle and in engine rooms - the product will not run off.
Hi-Temp Wax can be used to protect metal and sheet metal against corrosion during construction or repairs. The product is mostly applied to the inside of doors, chassis parts, beams, etc.

Hi-Temp Wax can also be applied with effect to protect power points, battery poles and other electrical components subject to the effects of weather, dampness, dirt and salt. Hi-Temp Wax ensures that these parts are highly water-repellent, as a result of which faults due to permeating dampness or corrosion can be kept to a minimum.

Hi-Temp Wax is available in two types of packaging: in an aerosol can and in a 1 litre can.

The 1 litre can is very economical and perfectly sprayable with the InnoQuip Pressure Pot Gun. The wide range of settings available on this gun allows you to spray layers of any thickness. For optimal treatment of cavities use the Cavity Tube Set.

The aerosol can is extremely user-friendly and easy to apply. When being applied the product initially is liquid, so it can penetrate deeply between the parts. After the propellant has evaporated away it leaves a beautiful, solid and pressure-resistant grease behind. The extra nozzle and tube supplied with the product make it very easy to apply in places which are difficult to access. For optimal treatment of cavities use the Hi-Temp Wax Spray Tube.

Properties

  • Perfect rust protection.
  • High temperature resistance (up to 150°C).
  • Insensitive to many chemicals (brake fluid, salt, etc.).
  • Excellent flow properties, but no long-term seepage after application.
  • Aromatic and silicone free, almost odourless.
  • Easy processing - no dismantling or covering of rubber and plastic parts needed.
  • Contains 0,1% UV Indicator which makes it easy to check during and after application which parts have been treated or not. Use a suitable UV lamp or blacklight to check this.

Instructions for use

  • Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Multisol or Innotec Seal and Bond Remover.
  • Application method: Shake can well before use. Spraying distance 20-25 cm. Apply a dense and evenly sprayed layer. When applying to cavities, use the special Hi-Temp Wax Spray Tube. After use, invert can and spray until clear to clean the nozzle.

Technical information

  • Base: Soaped grease acids
  • Density: ± 850 kg/m³
  • Consistency: Liquid (ready-to-use in aerosol)
  • Solvents: Mixture of aromatic-free solvents
  • Flash point: < 0°C
  • Temperature resistance: -40°C to +150°C (melting point > 150°C)
  • Water resistance: Excellent
  • Solvent resistance: Moderate
  • Tests: Excellent resistance to corrosion according to DIN 50021 (more than 500 hours)
  • Application conditions: +15°C to +35°C
  • Type of surface: Metal
  • Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Multisol or Innotec Seal and Bond Remover.
  • Application method: Shake can well before use. Spraying distance 20-25 cm. Apply a dense and evenly sprayed layer. When applying to cavities, use the special Hi-Temp Wax Spray Tube. After use, invert can and spray until clear to clean the nozzle.
  • Dust dry: Never, Hi-Temp Wax remains somewhat sticky.
  • Curing time: 2-4 hours at 20°C / 65% relative humidity
  • Recommended layer thickness: A dense and evenly sprayed layer
  • Sandability: Not sandable
  • Paintability: Not paintable
  • Cleaning of materials used: With Innotec Multisol
  • Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
  • Shelf life: 1 year in original, unopened packaging
  • Storage conditions: Store cool and dry
  • Type of batchcode: F
  • Other details: 0,1% UV Indicator
    OEM approved
  • EAN Code: 5400563035542

Only quality has a future