Hydro Guard 5 l

Art.: 80.0305.6100 Transparent
Can 5 l

Hydro Guard is a very high-quality impregnation product  providing colourless, breathable and water-repellent protection for façades and sloping roofs.

More info
This product is currently not available for order.
Please contact your local distributor.

Safety data sheet

To order, please contact your distributor

Description

Hydro Guard is a very high-quality impregnation product  providing colourless, breathable and water-repellent protection for façades and sloping roofs.

Hydro Guard reduces the penetration of moisture. The product prevents the occurrence of moisture stains, mould, wet walls, salt and calcium deposits, eruptions, frost damage, moss growth and dirt. These positive properties are achieved without sealing the wall, Hydro Guard ensures that the surface can breathe because the product allows the damp to pass through.

Hydro Guard has a wide range of application on most common vertical surfaces. The product offers excellent adhesion to all porous stones and upholsteries such as bricks, limestone and sandstone, cellular concrete, concrete stones, joint mortar, fibre cement and stucco (it is recommended to test first on the surface). Make sure not to apply Hydro Guard on wood, marble, slate and bluestone!
Hydro Guard has a very high solid content and is also perfectly UV resistant. Due to these properties the product works for a minimum of 10 years.

Properties

  • Protects stone and concrete against mould, moss, frost, etc.
  • Water vapour permeable, UV resistant.
  • Expected duration of protection: 10 years.
  • High permeating power.
  • Chemical bond to surface.
  • Completely transparent, does not colour.
  • High insulating power.

Instructions for use

  • Surface preparation: The surface must be clean, dry and free of grease. The surface can be slightly damp. Remove moss, alga, paint residues, etc., from the surface.
  • Application method: Cover windows and doors. Apply Hydro Guard undiluted and continuously as an even layer from the bottom to the top using either a brush or an atomizer. For best results the surface should be saturated. Prevent supersaturation which makes the product run or drip.

Technical information

  • Base: Oligomer siloxanes
  • Density: 837 kg/m³ (at 20°C / 65% relative humidity)
  • Consistency: Liquid
  • Viscosity: 1 mPa.s (at 20°C / 65% relative humidity)
  • Solvents: Mixture of alcohols
  • Flash point: ± 11°C
  • UV resistance: Very good
  • Percentage of solids: 8%
  • Application conditions: +5°C to +25°C
  • Type of surface: All porous stones and upholsteries such as bricks, limestone and sandstone, cellular concrete, concrete stones, joint mortar, fibre cement and stucco. It is recommended to test first on the surface.
    Remark: Not applicable on wood, marble, slate and bluestone.
  • Surface preparation: The surface must be clean, dry and free of grease. The surface can be slightly damp. Remove moss, alga, paint residues, etc., from the surface.
  • Application method: Cover windows and doors. Apply Hydro Guard undiluted and continuously as an even layer from the bottom to the top using either a brush or an atomizer. For best results the surface should be saturated. Prevent supersaturation which makes the product run or drip.
  • Consumption: Absorbing surfaces: max. 1,25 kg/m²
    Other surfaces: ± 0,5 kg/m²
  • Recommended layer thickness: Apply sufficient product to saturate the surface.
  • Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
  • Shelf life: 1 year in original, unopened packaging
  • Storage conditions: Store cool, dry and frostfree
  • Type of batchcode: F
  • EAN Code: 5400563030950

Only quality has a future