Aero-Primer

Description

Aero-Primer is part of the Aero-Bond Set, this is a high-quality anaerobic glue system, which has been specially developed for gluing metal to glass.

Properties

No product information available

Instructions for use

• Surface preparation: The surface must be clean, dry and free of grease. Clean the surface with Innotec Multisol or Innotec Seal and Bond Remover.
• Application method: Remove residues of old glue. Locate area and apply Aero-Primer to the window using the brush in the cap. Leave a few seconds to evaporate. If necessary, smooth off the edges of the mirror base. Then, depending on the size of the overlap, apply the correct amount of Aero-Bond to the middle of the mirror base. Position the mirror base and press lightly for 20 seconds. To maintain a sufficiently thick layer of glue and avoid glass to metal contact, do not press too hard when gluing. Leave to dry for 5 minutes. Mount the fixing and finish assembly. If necessary, clean with Foam Glass Clean Plus.

Technical information

• Base: Acetone
• Density: 815 kg/m³
• Consistency: Liquid
• Viscosity: 2 mPa.s
• Flash point: < 0°C
• Temperature resistance: -40°C to +149°C (like Aero-Bond)
• UV resistance: Good
• Application conditions: +15°C to +40°C
• Type of surface: Glass, ceramic layers, metal and aluminium
• Surface preparation: The surface must be clean, dry and free of grease. Clean the surface with Innotec Multisol or Innotec Seal and Bond Remover.
• Application method: Remove residues of old glue. Locate area and apply Aero-Primer to the window using the brush in the cap. Leave a few seconds to evaporate. If necessary, smooth off the edges of the mirror base. Then, depending on the size of the overlap, apply the correct amount of Aero-Bond to the middle of the mirror base. Position the mirror base and press lightly for 20 seconds. To maintain a sufficiently thick layer of glue and avoid glass to metal contact, do not press too hard when gluing. Leave to dry for 5 minutes. Mount the fixing and finish assembly. If necessary, clean with Foam Glass Clean Plus.
• Cleaning of materials used: With Innotec Multisol
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 1 year in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F