Alu Scratch Repair

Art.: 01.0637.6100 Transparent
Tube 10 g

Alu Scratch Repair is part of the Innotec Alu Scratch Repair System and is a professional filler for repairing scratches on aluminium surfaces.

More info
This product is currently not available for order.
Please contact your local distributor.

Safety data sheet

To order, please contact your distributor

Description

Alu Scratch Repair is part of the Innotec Alu Scratch Repair System and is a professional filler for repairing scratches on aluminium surfaces.

Alu Scratch Repair should always be used in combination with Alu Powder. Thanks to this combination the almost weightless filling mass will have the ideal hardness so that it will be perfectly sandable afterwards.

Alu Scratch Repair shows an excellent adhesion to almost all aluminium and metal surfaces (whether lacquered or not). After being applied, the Alu Scratch Repair should be activated with Alu Scratch Repair Activator in order to accelerate its curing. As a result, the product will be ready for further treatment or exposure after 2 minutes already.

Both in automotive and industry, it happens regularly that aluminium or metal look parts or objects show cosmetic damage or scratches, e.g. light metal rims, roof rails, aluminium frames, stair railings, balustrades, etc. Almost all these damages can be repaired with the Innotec Alu Scratch Repair System.

Packaged in a handy 10g tube with cannula, Alu Scratch Repair is easy to use and dose. Thanks to the unique easy-close cap the tube can be opened time and again without a problem, and has a longer storage life.

See also: Alu Scratch Repair System

Properties

  • Excellent adhesion.
  • Perfectly sandable.
  • Easy to use.
  • Temperature resistance up to 80°C.
  • Can be sprayed/painted over with almost any priming paint system.
  • Undercoat of Innotec Spot Primer advisable.
  • Finish with Innotec Alu Finish or Metal Finish.
  • Contains no solvents.
  • Almost weightless.

Instructions for use

  • Surface preparation: The surface must be clean, dry and free of grease. Clean the repair area using Repaplast Cleaner Antistatic (allow to evaporate for 5 minutes).
  • Application method: In a mixing cup, mix the required amount of Alu Scratch Repair with some Alu Powder (mixture approx 1:10) until a homogeneous mixture is obtained. Fill the damage/scratch with a thin layer of the mixture (apply several thin layers if necessary) and use a spatula to smooth it. Wait 30 seconds, then spray a thin layer of Alu Scratch Repair Activator over the part repaired with Alu Scratch Repair. After this, hardening will take place within a few seconds.

Technical information

  • Base: Ethyl cyano acrylate
  • Density: ± 1000 kg/m³
  • Consistency: Thixotropic gel
  • Solvents: Mixture of aliphatic solvents
  • Temperature resistance: -60°C to +80°C
  • Moisture resistance: Moderate. Not suited to prolonged immersion in water.
  • Solvent resistance: Moderate
  • Application conditions: +5°C to +35°C
  • Type of surface: Almost all aluminium and metal surfaces
  • Surface preparation: The surface must be clean, dry and free of grease. Clean the repair area using Repaplast Cleaner Antistatic (allow to evaporate for 5 minutes).
  • Application method: In a mixing cup, mix the required amount of Alu Scratch Repair with some Alu Powder (mixture approx 1:10) until a homogeneous mixture is obtained. Fill the damage/scratch with a thin layer of the mixture (apply several thin layers if necessary) and use a spatula to smooth it. Wait 30 seconds, then spray a thin layer of Alu Scratch Repair Activator over the part repaired with Alu Scratch Repair. After this, hardening will take place within a few seconds.
  • Sandability: Good, after a few minutes. Sand with P220, P320 and P400 successively (dry).
  • Paintability: Compatible with almost all modern priming paint systems. Advisable to apply a thin layer of Innotec Spot Primer before. Finish with Innotec Alu Finish or Innotec Metal Finish.
  • Cleaning of materials used: With Innotec Multisol
  • Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
  • Shelf life: 18 months in original, unopened packaging.
    If Alu Scratch Repair is stored at a temperature of ± 15°C to 25°C the product has a shelf life of only 6 months!
  • Storage conditions: Store cool, dry and dark (5°C to 15°C)
  • Type of batchcode: F
  • EAN Code: 5400563001424

Only quality has a future