Black Body-Paint

Description

Black Body-Paint is a perfect mat black paint with a low chalk percentage, as a result of which the product does not weather for a long time and is extremely resistant to the effects of weather. Black Body-Paint is also very impact and chip resistant and therefore extremely suited for spraying OEM mat black body parts. It is easy to sand, so ideal as a control spray.

Black Body-Paint can also be used to spray the types of supports and braces that are often made to measure.

Due to its fast drying Black Body-Paint extremely well suited to application in several layers. Its good sandability makes it perfect for use as a control paint.

Thanks to its aerosol packaging Black Body-Paint is extremely user-friendly and easy to apply. Using the special nozzle the product can be sprayed in a very professional spray pattern.

Properties

• Very nice OEM mat black colour.
• Easy to spray.
• Suitable for fast application in several layers.
• Chip proof and impact resistant.
• Excellent resistance to weathering.

Instructions for use

• Surface preparation: The surface must be clean, dry and free of dust and grease. Sand the surface, preferably with a sanding fleece. Clean metal surfaces with Innotec Multisol or Innotec Seal and Bond Remover. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic and treat with Innotec Repaplast Primer.
• Application method: Shake spray can well before use. Spraying distance ± 20 cm. Apply in a criss-cross layer. When applying several layers leave 10 minutes for the product to evaporate between each layer. After use, invert can and spray until clear to clean the nozzle.

Technical information

• Base: Cellulose
• Density: 773 kg/m³
• Consistency: Liquid (ready-to-use in aerosol)
• Solvents: Mixture of aromatic and aliphatic solvents
• Flash point: < 0°C
• Temperature resistance: -20°C to +125°C
• UV resistance: Good
• Water resistance: Excellent
• Application conditions: +15°C to +25°C (65% relative humidity)
• Type of surface: Almost all modern plastics and metals. Not suitable for plastics containing styrene.
• Surface preparation: The surface must be clean, dry and free of dust and grease. Sand the surface, preferably with a sanding fleece. Clean metal surfaces with Innotec Multisol or Innotec Seal and Bond Remover. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic and treat with Innotec Repaplast Primer.
• Application method: Shake spray can well before use. Spraying distance ± 20 cm. Apply in a criss-cross layer. When applying several layers leave 10 minutes for the product to evaporate between each layer. After use, invert can and spray until clear to clean the nozzle.
• Dust dry: ± 10 minutes (at 20°C / 65% relative humidity)
• Curing time: 2 hours (at 20°C / 65% relative humidity)
• Recommended layer thickness: ± 85µ (wet), ± 20µ (dry)
• Cleaning of materials used: With Innotec Multisol
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 2 years in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• Other details: If Black Body-Paint is used as a control layer when sanding, a drying time of 2-3 minutes will be sufficient.
• EAN Code: 5400563010860