Easy Gasket 275 ml

Description

Easy Gasket is a very high-grade and easy-to-use gasket maker, to replace or support all standard gaskets or seals in cars, trucks, boats, motorcycles, … e.g. for the gearbox, drive shafts, crankshafts, sump, and dynamo, ignition or clutch cover.

The big advantage is that there is no need to keep large quantities of standard gaskets in stock and that a perfectly fitting gasket can be made in the event that a standard gasket is missing such as for a foreign brand or if the delivery time is too long.

Easy Gasket can also be used along with the standard gasket to seal damaged or distorted surfaces.

Easy Gasket is fast, has a high temperature resistance (up to 270°C peak load) and is highly resistant to chemicals. Despite the good adhesion sealed components can be easily disassembled and the gasket is relatively easy to remove.

Easy Gasket is also extremely well suited to repairing damaged rubber parts of cars, trucks, boats, motorcycles, switch boxes, etc. For example repairing door rubbers and cracked or damaged cable retainers. In addition, Easy Gasket is perfectly suited for sealing electrical cabinets and multiple sockets. This is because the product is extremely flexible and has a stretch to break value of almost 400%.

Packed in a dual chamber pressurised can the product is less harmful to the environment and guarantees a long pot life. The special valve prevents blockage of the nozzle and does not break off. It also makes it possible to operate the can with one hand.

Properties

• Rubber-based.
• High-grade product for all kinds of seals.
• Unique valve with adjustable flow speed, suitable for larger and smaller applications.
• Can be applied simply and evenly, therefore easy and economical.
• Fast drying, excellent adhesion.
• Does not dry out in the can after use.
• Superior resistance to high temperatures (up to even 270°C) and other influences such as chemicals.
• OEM approved.

Instructions for use

• Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Multisol or Innotec Power Clean.
• Application method: Apply evenly straight from the packaging to one of the parts to be glued. Press parts together within 5 minutes. Turn finger-tight. Tighten after 20 minutes on the prescribed tightening moment.
• Other details: Not suitable for applications where this product will be immersed in petrol.
  OEM approved