Easy Gasket 275 ml

Description

Easy Gasket is a very high-grade and easy-to-use gasket maker, to replace or support all standard gaskets or seals in cars, trucks, boats, motorcycles, … e.g. for the gearbox, drive shafts, crankshafts, sump, and dynamo, ignition or clutch cover.

The big advantage is that there is no need to keep large quantities of standard gaskets in stock and that a perfectly fitting gasket can be made in the event that a standard gasket is missing.

Easy Gasket can also be used along with the standard gasket to seal damaged or distorted surfaces.

Easy Gasket is fast, has a high temperature resistance (up to 270°C peak load) and is highly resistant to chemicals. Despite the excellent adhesion sealed components can be easily disassembled and the gasket is relatively easy to remove.

Properties

• Superior resistance to high temperatures (up to even 270°C) and other influences such as chemicals and various oils.
• Fast drying, excellent adhesion.
• Rubber-based.
• High-grade product for all kinds of seals.
• Unique valve with adjustable flow speed, suitable for larger and smaller applications.
• Can be applied simply and evenly, therefore easy and economical.
• Does not dry out in the can after use.
• OEM approved.

Instructions for use

• Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Multisol or Innotec Power Clean.
• Application method: Apply evenly straight from the packaging to one of the parts to be glued. Press parts together within 5 minutes. Turn finger-tight. Tighten after 20 minutes on the prescribed tightening moment.
• Remarks: Not suitable for applications where this product will be immersed in petrol.

Technical information

• Base: Synthetic rubber
• Density: 1040 kg/m³
• Consistency: Pasty
• Solvents: No solvents
• Hardness: ± 17 (Shore A)
• Tensile strength: ± 1,70 N/mm² (according to DIN 53504)
• Elongation at break (%): ± 380% (according to DIN 53504)
• Modulus: ± 0,35 N/mm² (at 100% elongation) (according to DIN 53504)
• Temperature resistance: -50°C to +200°C
• Peak temperature resistance: 270°C
• Water resistance: Very good
• Solvent resistance: Good
• Acid resistance: Good
• Slump resistance (stability): Very good
• Application conditions: +5°C to +40°C
• Type of surface: Suitable as a gasket for most gearboxes, drive shafts, crankshafts, crankcase pans and dynamo, ignition or clutch covers. Always test surfaces in advance for adhesion and compatibility.
• Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Multisol or Innotec Power Clean.
• Application method: Apply evenly straight from the packaging to one of the parts to be glued. Press parts together within 5 minutes. Turn finger-tight. Tighten after 20 minutes on the prescribed tightening moment.
• Open time: 5 minutes (23°C / 50% relative humidity)
• Skin formation: 6 minutes (23°C / 50% relative humidity)
• Tack free: 8 minutes (23°C / 50% relative humidity)
• Curing time: ± 2 mm in 24 hours (23°C / 50% relative humidity)
• Cleaning of materials used: With Innotec Multisol
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 1 year in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• Other details: OEM approved
• Remarks: Not suitable for applications where this product will be immersed in petrol.
• EAN Code: 5400563001943