Hi-Temp Wax Dry Spray Transparent

Description

Hi-Temp Wax Dry is a highly durable, tack-free wax coating made from microcrystalline waxes. It provides excellent rust protection in factory original quality for sheet metal parts, vehicle undersides, suspension components, and (machine) parts. The product has excellent penetration and water-repellent properties, enabling it to reach even the smallest crevices and protect surfaces reliably and for the long term. Thanks to the addition of a UV indicator, the presence of Hi-Temp Wax Dry can always be detected.

Hi-Temp Wax Dry has an extremely high temperature resistance due to its special chemical composition. The product remains absolutely stable up to a temperature of 170°C. Due to its very high temperature resistance Hi-Temp Wax Dry is extremely well suited for use in the engine compartment of the vehicle and in engine rooms - the product will not run off. Hi-Temp Wax Dry is used to protect metal and sheet metal against corrosion during construction or repair of vehicles. After drying, Hi-Temp Wax Dry is completely tack-free and therefore also perfectly suitable for rust protection during transport and interim storage of metal parts.

Hi-Temp Wax Dry is also ideal for protecting power points and battery poles subject to the effects of weather, moisture, dirt and salt. Hi-Temp Wax Dry ensures that these parts are highly water-repellent, minimizing disturbances due to penetrating moisture or corrosion.

Hi-Temp Wax Dry is available in different types of packaging: besides the aerosol can and the 1 litre screw-top can, the product is also deliverable as a 60 litre and 200 litre barrel.
Spraying of the 1 l screw-top can is done using a traditional gun such as the Innotec Pressure Gun Basic (4-6 bar) or the Pressure Pot Gun specially developed for this purpose (2-4 bar, possibly in combination with the special Cavity Tube Set for hollow spaces), but can also be done with the Multi Sprayer 1,3 l.
The 60 l and 200 l barrels are sprayed with a traditional gun or with the Multi Sprayer 1,3 l or Multi Sprayer 10 l.
The aerosol can is extremely user-friendly and easy to apply. The product is initially liquid when applied, allowing it to spread evenly over the surface. Once the propellant has evaporated, a smooth, solid, and protective coating remains. The extra nozzle and tube supplied with the product make it very easy to apply in places which are difficult to access. For optimal treatment of cavities use the Hi-Temp Wax Spray Tube.

Properties

• Good flow qualities during application.
• No dripping after application.
• Perfect protection against corrosion.
• Aromatic/silicone free, almost odourless.
• Temperature resistant up to +170°C.
• Insensitive to brake fluid and salt.
• No disassembly of plastic & rubber parts required.
• Contains UV indicator.
• OEM approved.

Instructions for use

• Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Multisol or Innotec Seal and Bond Remover.
• Application method: Shake can well before use. Spraying distance 20-25 cm. Apply a dense and evenly sprayed layer. When applying to cavities, use the special Hi-Temp Wax Spray Tube. After use, invert can and spray until clear to clean the nozzle.

Technical information

• Base: Microcrystalline waxes and sulfonates
• Density: ± 774 kg/m³
• Consistency: Liquid (ready-to-use in aerosol)
• Solvents: Mixture of aromatic and aliphatic solvents
• Flash point: < 0°C
• Temperature resistance: -40°C to +170°C
• UV resistance: Prolonged exposure may result in ageing or discolouration.
• Water resistance: Excellent
• Solvent resistance: Good
• Tests: Excellent resistance to corrosion according to ISO 9227 (more than 500 hours)
• Application conditions: +15°C to +35°C
• Type of surface: Ferrous and non-ferrous metals
• Surface preparation: The surface must be clean, dry and free of grease. Clean surfaces with Innotec Multisol or Innotec Seal and Bond Remover.
• Application method: Shake can well before use. Spraying distance 20-25 cm. Apply a dense and evenly sprayed layer. When applying to cavities, use the special Hi-Temp Wax Spray Tube. After use, invert can and spray until clear to clean the nozzle.
• Tack free: After ± 3 days (100µ layer thickness (wet) / at 20°C / 65% relative humidity and with adequate ventilation)
• Dust dry: After ± 24 hours (100µ layer thickness (wet) / at 20°C / 65% relative humidity and with adequate ventilation)
• Recommended layer thickness: ± 220µ (wet), ± 50µ (dry)
• Paintability: Not paintable
• Cleaning of materials used: With Innotec Multisol
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 2 years in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• EAN Code: 5400563036716