Liquid Glass

Description

Liquid Glass is a crystal-clear and scratch-resistant 1-component flow-coating specially developed for protecting transparent plastic parts against all kinds of weathering effects, UV and mechanical loads as well as repairing the transparent plastic parts already affected. Thanks to its unique composition, Liquid Glass can be used without primer.

Liquid Glass has been specially developed for the automotive sector, where headlights are nowadays made of plastic, covered with a protective coating. If, after some time, the coating becomes weathered/discoloured due to UV rays and pollution such as acid rain, salt and dirt on the road, Liquid Glass is the ideal solution to give a new, long-lasting shine to the headlight. After curing, the product provides a scratch and wear resistant coating that meets the OEM specifications, resists weathering and does not yellow. This way Liquid Glass improves light output and thus enhances road safety as well as the aesthetic value of the car.
Attention: Avoid any contact of Liquid Glass with painted surfaces!

The special 60 ml pressure can makes Liquid Glass very user-friendly. The product is not sprayed or atomized, but applied using the flow-coating method. It can be applied without using a primer, dries quickly and has good filling properties. Moreover, Liquid Glass is very economical. The 60 ml content is sufficient for a full treatment of 1 headlight.

Properties

• High-quality flow-coating based on microhybrid polysiloxane.
• Quick-drying with good filling properties.
• Excellent resistance to weathering.
• Long-lasting shine.
• Dust dry after 10 minutes.
• Very high efficiency.

Instructions for use

• Surface preparation: See instructions for use
• Application method: See instructions for use
  Spraying distance 1-5 mm!

Technical information

• Base: Microhybrid polysiloxane
• Density: 910 kg/m³
• Consistency: Liquid (ready-to-use in aerosol)
• Solvents: Secondary butanol
• Flash point: 14°C
• Temperature resistance: Up to 120°C
• UV resistance: Excellent
• Water resistance: Very good
• Solvent resistance: Good, in the case of brief contact
• Application conditions: +15°C to +25°C and max. 55% relative humidity
• Type of surface: Plain or coated polycarbonate plastic
• Surface preparation: See instructions for use
• Application method: See instructions for use
  Spraying distance 1-5 mm!
• Dust dry: After ± 10 minutes at 20°C and 55% relative humidity
• Curing time: 60 minutes at 110°C
  90 minutes at 90°C
• Recommended layer thickness: 3-5 µm (dry layer thickness)
• Scratch resistance: After curing, according to ASTM-D4060:
  100 cycles - delta haze < 2%
  300 cycles - delta haze < 6%
  500 cycles - delta haze < 9%
  After curing, according to steel wool test (0000):
  no scratches
• Cleaning of materials used: With Innotec Multisol
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 2 years in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• Other details: If the surface has been pretreated according to the instructions, Liquid Glass can be used without a primer.
  
  If you want to apply a second layer of Liquid Glass, this should be done within 10 minutes after the first layer has been applied.
  
  Avoid any contact of Liquid Glass with painted surfaces!
• EAN Code: 5400563011218