Repaplast Structure Coat

Description

Repaplast Structure Coat is a professional PVC-free and low aromatic texture primer. Due to its excellent filling properties the product is extremely well suited for repairing textured plastics. With Repaplast Structure Coat it is possible to imitate the original OEM structure in a simple and professional manner after damage or repair.

Repaplast Structure Coat contains a quickly evaporating solvent. It is therefore possible to spray lots of different textures simply by varying the spraying distance of the aerosol can.

These days, plastics are used on a large scale in vehicles. So not only bumpers are made of unlacquered, textured plastic, but so are mirrors, mudguards and fenders. This plastic offers lots of positives: it is lightweight, relatively inexpensive and easy to shape and process. But it does have its negatives too. Textured plastic parts are also very vulnerable to damage such as scratches and scrapes. With Repaplast Structure Coat all of this minor damage can be perfectly repaired with a minimum of effort, and damaged structured parts can be made to look like new.

Due to its aerosol packaging Repaplast Structure Coat is very user-friendly and easy to use. The fine round spray nozzle gives a perfect end result and the product is very economical.

Use Innotec Masking Tape and Innotec Masking Paper Dispenser to protect the surrounding parts when spraying.

See also: Repaplast Scratch Repair System

Properties

• Easily sprayable, in several structures.
• Low aromatic.
• Permanently flexible.
• Excellent adhesion.
• Fast drying.
• Can be sprayed wet-on-wet after 10 minutes with Repaplast Colour Finish Better Care.

Instructions for use

• Surface preparation: The surface must be clean, dry and free of dust and grease. Clean the surface with Innotec Repaplast Cleaner Antistatic and a sanding block, then treat with Repaplast Primer New Formula.
• Application method: Allow to dry. Shake can well before use. First apply thin coats of Repaplast Structure Coat to the area to be repaired. By varying the spraying distance it is possible to imitate OEM structure. Use Repaplast Structure Coat on the rest of the plastic where required. Always close Repaplast Structure Coat with Repaplast Colour Finish Better Care.

Technical information

• Base: Mixture of resins, thickeners and solvents
• Density: ± 730 kg/m³
• Consistency: Liquid (ready-to-use in aerosol)
• Solvents: Mixture of aliphatic solvents
• Flash point: < 0°C
• Temperature resistance: -40°C to +70°C
• UV resistance: Poor
• Solvent resistance: Not resistant to solvents
• Application conditions: An application temperature above 15°C is necessary to get an optimal result.
• Type of surface: Most common plastics
• Surface preparation: The surface must be clean, dry and free of dust and grease. Clean the surface with Innotec Repaplast Cleaner Antistatic and a sanding block, then treat with Repaplast Primer New Formula.
• Application method: Allow to dry. Shake can well before use. First apply thin coats of Repaplast Structure Coat to the area to be repaired. By varying the spraying distance it is possible to imitate OEM structure. Use Repaplast Structure Coat on the rest of the plastic where required. Always close Repaplast Structure Coat with Repaplast Colour Finish Better Care.
• Dust dry: ± 10 minutes (at 20°C / 100µ layer thickness)
• Curing time: ± 55 minutes (at 20°C / 100µ layer thickness)
• Recommended layer thickness: 100µ (wet), 20µ (dry)
• Sandability: After full cure
• Paintability: After ± 20 minutes (at 20°C) with Innotec Repaplast Colour Finish Better Care.
• Cleaning of materials used: With Innotec Multisol
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 18 months in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F