Timber Fix 30 2-Component Repair Glue

Description

Timber Fix 30 is an extremely fast, semi-transparent 2-component repair glue for almost all types of wood.

Due to its special composition, the product enables a super-fast bonding of almost all types of wood. It is therefore the perfect solution for the woodworking industry, where many products with a long processing time are available, but where it is also often desirable to glue things quickly and professionally.

Timber Fix 30 has some unique properties that allow the gluing of wood species on which, until recently, it was very difficult to create a good bond. Repairs that used to take a lot of time can be carried out professionally in less than no time with Timber Fix 30 . Clamping is only necessary for a short time or often not at all. This makes Timber Fix 30 extremely suitable for quick repairs and all types of emergency repairs in the wood industry. Thanks to its good stability and optimum open time, the product is also perfect for vertical repairs on wood materials.

Timber Fix 30 is a semi-transparent glue. A possible connection joint will therefore assume the colour of the glued wood.

Timber Fix 30 is very user-friendly and can be dosed very accurately thanks to the handy dual cartridge and the use of the Mixer Gun. The special mixer nozzle always ensures the right mixture proportions and prevents the remaining product from hardening in the cartridge. This means that an opened cartridge of Timber Fix 30 can still be kept for a long time.

Properties

• 2-component product for very quick gluing.
• Free from H351.
• Very good adhesion to almost all types of wood and woodfibre based materials.
• Ultra-fast drying.
• Quickly touch-dry and ready for further treatment.
• High tensile strength, which exceeds the strength of most wood materials.
• Semi-transparent, therefore perfectly compatible with unpainted wood species.
• Good temperature resistance.
• Handy dual cartridge with mixer nozzle for accurate application.
• Perfectly paintable with Innotec ISO PRIM.
• Classified in durability class D3 according to EN 204.

Instructions for use

• Surface preparation: The surface must be clean, dry and free of grease. The best result is achieved when the surface is sanded/roughened. ATTENTION: degrease oily types of wood with Innotec Repaplast Cleaner Antistatic.
• Application method: Because Timber Fix 30 dries so quickly, set out all the tools you will need before starting the repair or gluing. Fix the mixer nozzle to the double cartridge. When using a new cartridge for the first time, always squeeze out and discard the first two centimetres, to guarantee an optimal mix of the Timber Fix 30. After use, do not remove the mixer nozzle; exchange it the next time you want to use the product. Gather up the parts to be glued and roughen or sand the contact surfaces. Clean the parts using Innotec Repaplast Cleaner Antistatic. Use the mixer nozzle to spread the Timber Fix 30 on the surface and join the parts to be glued together as quickly as possible, within 10 seconds. Keep the repair area fixed for a short time until the Timber Fix 30 has strengthened sufficiently. The repaired part can be treated again after 10 minutes. This includes sanding, milling, drilling, etc.
• Paintability: After 1 hour, optimally with Innotec ISO PRIM as a base layer (20°C / 50% relative humidity)

Technical information

• Base: 2 component polyurethane
• Density: ± 1160 kg/m³
• Consistency: Pasty
• Hardness: 75 (Shore D)
• Tensile strength: 15 N/mm² (according to DIN 53504)
• Elongation at break (%): ± 35% (according to DIN 53504)
• Temperature resistance: -40°C to +95°C
• Water resistance: Classified in durability class D3 according to EN 204
• Application conditions: +5°C to +35°C
• Type of surface: Almost all types of wood
• Surface preparation: The surface must be clean, dry and free of grease. The best result is achieved when the surface is sanded/roughened. ATTENTION: degrease oily types of wood with Innotec Repaplast Cleaner Antistatic.
• Application method: Because Timber Fix 30 dries so quickly, set out all the tools you will need before starting the repair or gluing. Fix the mixer nozzle to the double cartridge. When using a new cartridge for the first time, always squeeze out and discard the first two centimetres, to guarantee an optimal mix of the Timber Fix 30. After use, do not remove the mixer nozzle; exchange it the next time you want to use the product. Gather up the parts to be glued and roughen or sand the contact surfaces. Clean the parts using Innotec Repaplast Cleaner Antistatic. Use the mixer nozzle to spread the Timber Fix 30 on the surface and join the parts to be glued together as quickly as possible, within 10 seconds. Keep the repair area fixed for a short time until the Timber Fix 30 has strengthened sufficiently. The repaired part can be treated again after 10 minutes. This includes sanding, milling, drilling, etc.
• Open time: 30 seconds (20°C / 50% relative humidity)
• Clamping time: Recommended 5 minutes
• Drying time: Final strength achieved after 24 hours (20°C / 50% relative humidity)
• Filling capacity: Up to 5 mm
• Recommended layer thickness: 1 to 4 mm (optimally ± 2 mm)
• Sandability: Excellent after 10 minutes (20°C / 50% relative humidity)
• Paintability: After 1 hour, optimally with Innotec ISO PRIM as a base layer (20°C / 50% relative humidity)
• Cleaning of materials used: With Innotec Multisol
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 18 months in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• EAN Code: 5400563036464