Masking Tape

Art.: 05.1339.0500 Egg Yellow
Roll 12,5 m

Masking Tape is a high-quality cover tape strengthened with a PET film and specially developed to protect rubber and parts of vehicles or objects that need to be covered.

More info
This product is currently not available for order.
Please contact your local distributor.

Safety data sheet

To order, please contact your distributor

Description

Masking Tape is a high-quality cover tape strengthened with a PET film and specially developed to protect rubber and parts of vehicles or objects that need to be covered.

Perforation between the parts makes that the tape can be perfectly applied in roundings or under rubbers. Masking Tape has a glue layer with a good resistance to heat, moisture and solvents and is therefore perfectly suited for covering purposes during painting, even in the spray booth. Masking Tape resists to almost any modern paint system.

Masking Tape is an important part of the Innotec Alu Scratch Repair System. The tape can be pushed easily between the tyre and the rim, so that the tyre is protected against mechanical damage, spraying mist and being soiled by the Alu Scratch Repair.

See also: Alu Scratch Repair System

Properties

  • Very durable cover tape with a non adhesive, hard plastic margin that can be pushed easily under the rubber strips of a car window.
  • Protects the rubber against spraying mist, without causing paint lines.
  • Perfectly usable in angles and roundings thanks to perforation.
  • Excellent resistance to high temperatures (up to 110°C).
  • Good resistance to moisture and solvents.
  • Margin with 10 mm PET film.
  • Leaves no annoying glue residues after removal.
  • Perfect adhesion to windows, paintwork, rubber, plastics and numerous other surfaces.

Instructions for use

  • Surface preparation: The surface must be clean, dry and free of grease.
  • Application method: Remove the protective foil, push the PET film under the rubber and press down with enough tension in the opposite direction.

Technical information

  • Base: PE coated paper with an acrylic glue layer
  • Dimensions: 12,5 m x 45 mm x 90 µ PET film 10 mm
  • Tensile strength: 35 N/cm
  • Elongation at break (%): 4,5%
  • Temperature resistance: -20°C to +110°C
  • UV resistance: Good
  • Water resistance: Good
  • Solvent resistance: Good
  • Type of surface: Most surfaces
  • Surface preparation: The surface must be clean, dry and free of grease.
  • Application method: Remove the protective foil, push the PET film under the rubber and press down with enough tension in the opposite direction.
  • Shelf life: 2 years in original, unopened packaging
  • Storage conditions: Store cool and dry, at a temperature between +5°C and 20°C
  • Type of batchcode: F
  • EAN Code: 5400563026106

Only quality has a future