Safe Seal IQ 600 ml

Description

Safe Seal IQ is a high-quality strongly adhesive windscreen sealant based on MS polymers and specially developed to install glued windscreens in the Mobility sector where a setting time of ± 15 minutes is desired. Safe Seal IQ does not contain isocyanates nor solvents.

Due to its unique composition Safe Seal IQ offers perfect adhesion to old windscreen sealant, lacquered metal, polyester, glass and ceramic edges, without using a primer and/or activator.

These properties ensure that no other extra products are necessary when using Safe Seal IQ to fit windscreens in cars, trucks, bus, trains, trams and boats. The chances of making a mistake when fitting are also highly reduced. Therefore, the product simplifies the formerly complex process of fitting these windscreens.
Safe Seal IQ is also free of solvents and isocyanates and does not contain silicones either. Due to its unique composition the product is perfectly UV resistant, so it is extremely well suited to applications in which the sealant edge is exposed to sunlight.

A very big advantage of the product is that it has an extremely high initial strength and this has a positive effect in that the windscreen does not subside, certainly if it has to be placed vertically. In addition, Safe Seal IQ has the very positive property of having high constancy, meaning that the strip of sealant does not collapse during processing. When hard, Safe Seal IQ contributes to the rigidity of the bodywork. Therefore, the product also gives the vehicle very good torsion rigidity.

Safe Seal IQ has been certified by TÜV Rheinland after having successfully passed a crash test according to FMVSS 212: only 30 minutes after the windscreen was glued, the test car smashed into a concrete wall at more than 48 km/h, but the bonding remained 100% intact so all safety systems like airbags and seat belt retractors could work optimally. This proves that Safe Seal IQ contributes to maximum vehicle safety as intended by the designer upon car development.

Due to its base of MS polymers Safe Seal IQ has a long pot life after opening, so opened packs no longer need to be discarded. The product is also very easy to remove from the hands.

The handy foil packs make Safe Seal IQ very economical and easy to use.

Windscreens glued with Safe Seal IQ can be cleaned and degreased using Seal and Bond Remover or Multisol.

Properties

• Excellent adhesion to old windscreen sealant, lacquered metal, polyester, glass and ceramic edges, without using a primer and/or activator.
• Simple method of use, no extra products needed.
• Open setting time of +/- 20 minutes.
• Solvent, isocyanate and silicone free.
• Long storage life, even after opening.
• Easy to remove from hands.
• Good UV resistance.
• Very good constancy, the strip of sealant does not collapse.
• Very high initial strength, the windscreen does not subside.
• Good torsion rigidity, contributes to the rigidity of the bodywork
• Passed crash test according to FMVSS 212 after 30 minutes with best possible results.
• High Modulus, Low Conductivity (HMLC).
• OEM approved.

Instructions for use

• Surface preparation: The surface must be clean, dry and free of grease. Cut away the old sealant layer up to a thickness of ± 2 mm. Clean the edge of the windscreen with Innotec Multisol or Innotec Seal and Bond Remover, wipe off well with a clean, dry cloth and leave to evaporate for 10 minutes. Even if there are no remains of old sealant in the rebate, clean with Innotec Multisol or Innotec Seal and Bond Remover, wipe off well with a clean, dry cloth and leave to evaporate for 10 minutes.
• Application method: Apply Safe Seal in a V shape (8*12) directly from the foil pack using a glue gun (InnoQuip Foil Pack Gun or Air Sealant Applicator 600). Mount the windscreen within 15 minutes and press lightly.