Finish Resin

Art.: 07.0076.9999
Bottle 1,5 ml

Finish Resin is part of the Innotec Windshield Repair System. This finishing resin has been specially developed to protect the surface of the repair from the windscreen wipers and the effects of the weather.

More info
This product is currently not available for order.
Please contact your local distributor.

Safety data sheet

To order, please contact your distributor

Description

Finish Resin is part of the Innotec Windshield Repair System. This finishing resin has been specially developed to protect the surface of the repair from the windscreen wipers and the effects of the weather.

Due to its unique composition Finish Resin is the perfect finishing resin. The product is very strong and offers outstanding adhesion. In addition, a thickening agent has been added to Finish Resin, giving it a higher viscosity through which it can seal damages up to 3 mm maximum.

The finishing resin is packaged in a special bottle with a very accurate dosing mechanism. In addition, the content is designed to deal with a number of repairs, so that each time the product is fresh and at its best.
On the inside, the packaging is provided of an UV-resistant foil, this way the repair resin keeps its high quality for a long time.

See also: Windshield Repair System

Properties

No product information available

Instructions for use

  • Surface preparation: The surface must be clean, dry and free of grease. Clean the surface with Innotec Foam Glass Clean Plus.
  • Application method: Remove the Fixer with the injector and apply a drop of Finish Resin just above the crack. Then lay the rounded side of the Innotec Foil on the repair resin. Do not press, the film will attach itself to the surface. Now use the InnoQuip UV LED Lamp to cure the repair resin. See also the directions for use of the Innotec Windshield Repair System.

Technical information

  • Base: Methacrylate
  • Density: 1100 kg/m³
  • Consistency: Liquid
  • Viscosity: 1500 mPa.s
  • Hardness: 60 (Shore D)
  • Temperature resistance: -40°C to +120°C
  • UV resistance: Good, does not yellow when hard.
  • Moisture resistance: Good
  • Application conditions: +10°C to +30°C. Not in sunlight.
  • Type of surface: Glass and Innotec Resin
  • Surface preparation: The surface must be clean, dry and free of grease. Clean the surface with Innotec Foam Glass Clean Plus.
  • Application method: Remove the Fixer with the injector and apply a drop of Finish Resin just above the crack. Then lay the rounded side of the Innotec Foil on the repair resin. Do not press, the film will attach itself to the surface. Now use the InnoQuip UV LED Lamp to cure the repair resin. See also the directions for use of the Innotec Windshield Repair System.
  • Drying time: 90 seconds in combination with the InnoQuip UV LED Lamp (with Battery)
    2 minutes in combination with the InnoQuip UV LED Lamp
    6 minutes in combination with the InnoQuip UV-Lamp
  • Cleaning of materials used: With Innotec Multisol or Innotec Foam Glass Clean Plus
  • Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
  • Shelf life: 9 months in original, unopened packaging
  • Storage conditions: Store cool and dry. Store in the special UV-protective packaging.
  • Type of batchcode: F
  • EAN Code: 5400563027479

Only quality has a future