Innoplast Cleaner 5 l

Description

Innoplast Cleaner is a specially developed liquid cleaner for almost any type of plastic. Because of its unique composition, this product removes tenacious contamination, such as remaining polishing agent, cleaning deep down to the pores. Moreover, Innoplast Cleaner eliminates very efficiently and safely nicotine, grease and dirt from plastics in both inside and outside applications. After cleaning, the treated surface will regain its original appearance again.

Innoplast Cleaner is the ideal professional cleaner for removing tenacious contamination of plastic bumpers, protective and decorative strips, canvas, doors, frames, legs of tables/chairs, etc.

Innoplast Cleaner can be applied with a damp Inno-Cleaner or sprayed on the surface to be cleaned by using the Innotec Multi Sprayer. In case of structured surfaces, the use of a long-haired brush specially developed for this kind of purpose Cleaning Brush) can contribute to a deeper cleaning. It is advisable to use Innoplast Innoplast Protector to re-protect the cleaned surface.

Innoplast Cleaner is ready-for-use and does not require diluting. The product comes in a user-friendly 5 l can.

Properties

• Very effective cleaner.
• For almost all plastic surfaces.
• Ideal for removing chalk or polishing lines from plastic parts.
• Leaves no streaks.
• Free of silicones, therefore body shop safe.
• Suitable for inside and outside applications.

Instructions for use

• Application method: Spray Innoplast Cleaner onto the surface to be cleaned, rub in with a brush / cloth if necessary. In case of deep contamination, allow to work in for 1-2 minutes. Rinse with plenty of water. Do not use in direct sunlight / on warm surfaces! Do not allow to work in on artificial glass, high-gloss paints or delicate surfaces! After cleaning, protect plastic surfaces with Innoplast Protector. Test on a non-visible area.

Technical information

• Base: Aliphatic hydrocarbons
• Density: 1.090 kg/m³ (at 20°C)
• Viscosity: 1 mPa.s (at 20°C)
• Application conditions: +5°C to +30°C
• Type of surface: Suitable for almost all plastic surfaces. Do not let the product dry.
• Application method: Spray Innoplast Cleaner onto the surface to be cleaned, rub in with a brush / cloth if necessary. In case of deep contamination, allow to work in for 1-2 minutes. Rinse with plenty of water. Do not use in direct sunlight / on warm surfaces! Do not allow to work in on artificial glass, high-gloss paints or delicate surfaces! After cleaning, protect plastic surfaces with Innoplast Protector. Test on a non-visible area.
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 2 years in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• EAN Code: 5400563021262