Speed Primer Anthracite

Description

Speed Primer is a filling primer specially developed for spot repairs. It provides a professional result because of its closed surface structure and its perfect paintability.

The product offers excellent adhesion to just about any type of surface such as metal, wood, plaster, and most plastics, as well as sanded layers of lacquer. Speed Primer is ideal for filling sanding scratches and small irregularities. Due to its unique composition the product is suitable as a base layer for just about every type of modern and common paint system (prior testing is required).

Speed Primer is perfectly suited to repair minor damage. It is often difficult to use a spray gun for minor damage, because often the repair requires only a small quantity of product. As a result, and because you can use the spray can in just about any place, Speed Primer is an ideal solution for a business that does not have its own spray booth.

The product has a high solid content and excellent fluidity. Due to its fast drying Speed Primer is dust dry after only 10 minutes and sandable (wet and dry) after 20 minutes.

Speed Primer is available in different colours. Due to this choice of different colours, optimal covering can be obtained with almost all existing basic colours which will considerably reduce the risk of visible edges showing up.

Thanks to its aerosol packaging Speed Primer is extremely user-friendly and easy to apply. The product has a special nozzle which gives a spray pattern exactly like the cone of a spray gun. The nozzle is adjustable, so that the product can be sprayed horizontally and vertically.

Properties

• Ideally applicable on ferrous and non-ferrous metals.
• Excellent adhesion to most plastics, wood, putty, etc.
• Ideal for filling sanding scratches.
• Universally paintable with almost each modern paint system (prior testing is required).
• Unique flat spray pattern through the adjustable nozzle.
• Excellent fluidity and tight cell structure.
• Very good resistance to the use of degreasers.
• Fast drying: can be painted over after 20 minutes.
• Well sandable.

Instructions for use

• Surface preparation: The surface must be clean, dry and free of dust and grease. Sand the surface and clean with Innotec Multisol. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic and pre-treat them with Innotec Repaplast Primer. (Make sure that the temperature of the surface is at least +15°C!)
• Application method: Shake can well during at least 2 minutes before use. Spraying distance 15-20 cm. Apply in 2 smooth criss-cross layers. Leave 5 minutes for the product to evaporate between the two layers.

Technical information

• Base: Styrene acrylate
• Density: 790 kg/m³
• Consistency: Liquid (ready-to-use in aerosol)
• Solvents: Mixture of aromatic and aliphatic hydrocarbons
• Flash point: < 0°C
• Temperature resistance: -20°C to +110°C
• UV resistance: Good. Slight change in colour may appear.
• Water resistance: Good
• Solvent resistance: Very good. Can be cleaned after ± 20 minutes (depending on the layer thickness) with almost any universal bodywork degreaser.
• Application conditions: +15°C to +30°C
• Type of surface: Sanded layers of old paint, metal, all non-ferrous metals, aluminium, wood, MDF, galvanised metal, plaster and most common plastics
• Surface preparation: The surface must be clean, dry and free of dust and grease. Sand the surface and clean with Innotec Multisol. Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic and pre-treat them with Innotec Repaplast Primer. (Make sure that the temperature of the surface is at least +15°C!)
• Application method: Shake can well during at least 2 minutes before use. Spraying distance 15-20 cm. Apply in 2 smooth criss-cross layers. Leave 5 minutes for the product to evaporate between the two layers.
• Open time: Max. 24 hours
• Dust dry: ± 5 to 8 minutes (at 20°C / 65% relative humidity)
• Curing time: 60 minutes (at 20°C / 65% relative humidity / 40µ layer thickness)
• Recommended layer thickness: 40 µm (dry layer thickness)
• Sandability: After ± 20 minutes (at 20°C / 65% relative humidity) (wet and dry)
• Paintability: After ± 20 minutes (at 20°C / 65% relative humidity) compatible with almost all modern paint systems. Due to the huge variety of paint types on the market, it is best to test the paint beforehand. Please observe the instructions of the relevant paint manufacturer.
• Cleaning of materials used: With Innotec Multisol
• Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
• Shelf life: 2 years in original, unopened packaging
• Storage conditions: Store cool and dry
• Type of batchcode: F
• EAN Code: 5400563007396