Repaplast Colour Finish BC Black

Art.: 02.3100.5000 Black
Aerosol can 500 ml

Repaplast Colour Finish Better Care is a modern, professional plastic paint which is available in the most common OEM colours. This means that the product is extremely well suited to restoring repaired or weathered plastic parts to their original state with a minimum of effort.

More info
This product is currently not available for order.
Please contact your local distributor.

Safety data sheet

To order, please contact your distributor

Description

Repaplast Colour Finish Better Care is a modern, professional plastic paint which is available in the most common OEM colours. This means that the product is extremely well suited to restoring repaired or weathered plastic parts to their original state with a minimum of effort.

Repaplast Colour Finish Better Care is the ultimate plastic layer to finish off repairs using the Repaplast Scratch Repair System, also after the repair area has been treated with Repaplast Structure Coat.

Repaplast Colour Finish Better Care is made from alkyd resin and is therefore water and UV resistant, permanently flexible, and it offers excellent adhesion to plastic without using a primer.

These days, plastics are used on a large scale in vehicles. So not only bumpers, mirrors, mudguards and fenders are made of unlacquered, textured plastic, but so are just about all of the interior parts. This plastic offers lots of positives: it is lightweight, relatively inexpensive and easy to shape and process. But it does have its negatives too. Most are not particularly UV resistant, and so over time the softening agents migrate from the plastic. This makes the material more brittle and the top layer takes on a weathered look. Plastic is also very vulnerable to damage such as scratches and scrapes. With Repaplast Colour Finish Better Care all of this minor damage can be perfectly repaired with a minimum of effort, and weathered plastic can be made to look like new.

Due to its aerosol packaging Repaplast Colour Finish Better Care is very user-friendly and easy to use. The special flat spray nozzle gives the aerosol can a spray pattern comparable with that of a spray gun. This ensures a perfect end result.

To mask off the repair area when spraying, use the Innotec Masking Paper Dispenser.

Properties

  • Permanently flexible.
  • Very impact resistant.
  • Colourfast and UV resistant.
  • Good petrol resistance.
  • Excellent adhesion.
  • Easily sprayable, even in several layers.
  • Fast drying.
  • OEM approved.

Instructions for use

  • Surface preparation: The surface must be clean, dry and free of dust and grease. Sand the surface, preferably with a sanding block. Clean metal surfaces with Innotec Multisol or Innotec Seal and Bond Remover. Provide untreated metal with a primer (Innotec Speed Primer or Innotec Zinc Coat). Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic. If you do not want to spray the plastic part completely, we recommend you a pre-treatment with Innotec Repaplast Primer New Formula.
  • Application method: Shake spray can well before use. Spraying distance 25-30 cm. Apply in several thin layers. When applying several layers leave 10 minutes for the product to evaporate in between. After use, invert can and spray until clear to clean the nozzle.

Technical information

  • Base: Nitrocellulose
  • Density: 830 kg/m³
  • Consistency: Liquid (ready-to-use in aerosol)
  • Flash point: < 0°C
  • Temperature resistance: -30°C to +100°C
  • UV resistance: Excellent
  • Water resistance: Excellent
  • Application conditions: +15°C to +30°C (max. 80% relative humidity)
  • Type of surface: Just about all modern plastics and metals
  • Surface preparation: The surface must be clean, dry and free of dust and grease. Sand the surface, preferably with a sanding block. Clean metal surfaces with Innotec Multisol or Innotec Seal and Bond Remover. Provide untreated metal with a primer (Innotec Speed Primer or Innotec Zinc Coat). Clean plastic surfaces with Innotec Repaplast Cleaner Antistatic. If you do not want to spray the plastic part completely, we recommend you a pre-treatment with Innotec Repaplast Primer New Formula.
  • Application method: Shake spray can well before use. Spraying distance 25-30 cm. Apply in several thin layers. When applying several layers leave 10 minutes for the product to evaporate in between. After use, invert can and spray until clear to clean the nozzle.
  • Dust dry: ± 12-14 minutes (20°C / 65% relative humidity)
  • Curing time: 2 hours (20°C / 65% relative humidity)
  • Recommended layer thickness: Covering, built up in thin layers
  • Cleaning of materials used: With Innotec Multisol
  • Cleaning of hands: With Innotec Power Scrubs or with Innotec Safe Hand Clean Plus and water
  • Shelf life: 2 years in original, unopened packaging
  • Storage conditions: Store cool and dry
  • Type of batchcode: F
  • Other details: OEM approved
  • EAN Code: 5400563009734

Only quality has a future